EMG - H1A Bridge Black Chrome
90 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
The EMG H1A Black Chrome is the humbucker for those who love lively midrange. Its Alnico V/steel magnet brings warmth and brilliance to your playing. Every note comes out with presence. And it doesn't need a battery to express its character.
ARTICLE N° 108548
Presentation
The EMG H1A Black Chrome is a pickup that doesn't show off. Behind its chic bonnet, it hides an expressive vintage soul. The Alnico V magnet combined with steel creates the right balance between smoothness and edginess. The midrange asserts itself, the treble remains soft, and the bass hits without drooling.
In the neck, the sound breathes. In the bridge, it gains in brilliance and density. The over-wound coils add gain without sacrificing definition. The resonant impedance exceeds 80 kOhm: enough to cope without weakening. There's no need for batteries: everything works with passive, solderless cabling. The kit includes the two 500k potentiometers, the jack, the screws, the bridge ground and all the connectors. Quick assembly, immediate results.
This model is for those looking for a sound personality that stands out from the crowd. Neither too wise nor too wild. It remains stable under nervous playing, but retains an expressive finesse for more sensitive riffs. And that makes all the difference when you're looking for a timbre with experience.
In the neck, the sound breathes. In the bridge, it gains in brilliance and density. The over-wound coils add gain without sacrificing definition. The resonant impedance exceeds 80 kOhm: enough to cope without weakening. There's no need for batteries: everything works with passive, solderless cabling. The kit includes the two 500k potentiometers, the jack, the screws, the bridge ground and all the connectors. Quick assembly, immediate results.
This model is for those looking for a sound personality that stands out from the crowd. Neither too wise nor too wild. It remains stable under nervous playing, but retains an expressive finesse for more sensitive riffs. And that makes all the difference when you're looking for a timbre with experience.
Other features
-
EMG H1A Black Chrome
-
Type: Passive micro humbucker
-
Series : EMG-HZ (model H1A)
-
.
-
Passive humbucker with vintage character
-
Alnico V/steel magnet (A/S)
-
Warm sound, rich mids, smooth highs
-
Very good clarity and presence
-
Neck sound: smooth and defined
-
Bridge sound: punchy, bright bass
-
Overwound coils, higher gain
-
Works with standard serial wiring
-
Resonance impedance: 80.8 kOhm
-
DC resistance: 13.65 kOhm
-
Inductance: 7.80 henries
-
Resonance (1MΩ/47pF): 3.00 kHz
-
No battery required
-
Passive microphone, output without power supply
-
Wired using solderless connectors
-
Compatible with all EMG-HZ
-
Gold logo screen-printed on cover
-
Wires: red, black, white, green, ground
-
String ground per wire included
-
Standard spacing (Tune-O-Matic) 49mm
-
Potentiometer short shaft (Strat) 10 mm
-
.
-
1 volume potentiometer 500K
-
1 500K tone potentiometer
-
1 mono output jack
-
1 input/output bus for 2 microphones
-
1 microphone cable (approx. 38 cm)
-
2 link cables (approx. 14 cm)
-
1 output cable (approx. 15 cm)
-
1 bridge ground cable (approx. 15 cm)
-
1 pair of mounting screws and springs
-
.
-
Length: 78.5 mm
-
Width: 38.1 mm
-
Height: 22.8 mm
-
Approximate weight: 160 g
To find out more...
The EMG H1A Black Chrome plunges you into a dense, responsive grain. With its Alnico V magnet, it retains a natural response, even on strong shots. The balance between warmth and clarity remains stable, whatever your attack.
Its 7.80 henries inductance provides real bass support. The highs remain smooth, even with moderate saturation. It works just as well in taut solos as in open tunings, always with good sustain across the spectrum.
The solderless cabling is designed to save time. You get everything: cables, pots, screws, jack, tailpiece. All installed without the need for complex tools.
It integrates perfectly into an existing HZ circuit. Its 49 mm spacing is suitable for classic Tune-o-Matic. So this pickup slips easily into a Gibson configuration, without any alterations or adjustments. A great way to revive a vintage guitar without changing its personality.
Its 7.80 henries inductance provides real bass support. The highs remain smooth, even with moderate saturation. It works just as well in taut solos as in open tunings, always with good sustain across the spectrum.
The solderless cabling is designed to save time. You get everything: cables, pots, screws, jack, tailpiece. All installed without the need for complex tools.
It integrates perfectly into an existing HZ circuit. Its 49 mm spacing is suitable for classic Tune-o-Matic. So this pickup slips easily into a Gibson configuration, without any alterations or adjustments. A great way to revive a vintage guitar without changing its personality.
