EMG - HA Black
75 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
A single-coil pickup in a humbucker housing: that's rare, but not with the EMG HA Black. It retains the soul of the SA, with a softer midrange. The Alnico magnet broadens the response. Harmonics rise and noise falls. Everything is seamless, massless and burr-free. You just get quality playing.
ARTICLE N° 107876
Presentation
Lepickup EMG HA Black is like no other. Its humbucker body hides a single-coil core, with a diagonal orientation that influences dynamics. It retains the clarity of the SA, but injects a silkier richness into the midrange. The Alnico magnet responds with breadth: luminous highs, precise lows and organic mids. The 3.70 kHz frequency adds air without becoming sharp. The attack remains stable even in powerful sweeps, with a voltage peak at 3 volts.
No ground to connect, no soldering iron. Assembly is silent, thanks to EMG's tool-free wiring. The connectors are easy to assemble using the components supplied. There's a volume pot, a tone pot and an input/output bus. The 10 kΩ output impedance ensures compatibility with modern pedals. Background noise drops to -101 dB at 60 Hz. So your voice is clean, but never sterile. The 400 µA current and 9V battery provide 600 hours of autonomy.
This model is a simple coil that doesn't play small. It's just precise, warm and ready to respond.
No ground to connect, no soldering iron. Assembly is silent, thanks to EMG's tool-free wiring. The connectors are easy to assemble using the components supplied. There's a volume pot, a tone pot and an input/output bus. The 10 kΩ output impedance ensures compatibility with modern pedals. Background noise drops to -101 dB at 60 Hz. So your voice is clean, but never sterile. The 400 µA current and 9V battery provide 600 hours of autonomy.
This model is a simple coil that doesn't play small. It's just precise, warm and ready to respond.
Other features
-
EMG HA Black
-
EMG Original Single Coil Series
-
Single coil microphone in humbucker housing
-
Noise-free operation, same clarity as SA
-
Alnico magnet for wide frequency response
-
Clear, warm sound with rich harmonics
-
Ideal for brilliant rhythm and solo work
-
Solderless installation
-
Top left to bottom right coil orientation
-
Compatible with EMG controls (VLPF, EXG, SPC, RPC)
-
No string earthing required
-
Approximate battery life: 600 hours
-
Current consumption: 400 microamps at 9V
-
Output impedance: 10 kΩ
-
Output level (string): 1.00 V
-
Output level (strum) : 3.00 V
-
Resonance frequency: 3.70 kHz
-
Residual noise: -101 dB at 60 Hz
-
Standard spacing (Tune-O-Matic) 49mm
-
Short shaft potentiometer (Strat) 10 mm
-
Max supply voltage: 27 V DC
-
1 x 25 kΩ volume potentiometer
-
1 x 25 kΩ tone potentiometer
-
1 battery bus
-
1 stereo output jack
-
1 input/output bus for two microphones
-
1 pair of mounting screws and springs
-
1 microphone cable
-
2 connection cables
-
1 output cable
-
1 battery cable
-
Dimensions (L x H x W): 78.5 mm x 22.8 mm x 18.4 mm
-
Weight: approx. 69.8 g
To find out more...
The EMG HA microphone takes advantage of its 3.70 kHz frequency to boost harmonics. This clever adjustment creates a good balance between warmth and brightness, giving a vibrant tone.
Its high output - 1.00 V for single notes and 3.00 V for chords - far exceeds that of passive pickups, delivering more presence in every performance.
With an ultra-low noise level (-101 dB), it eliminates interference in the studio and on stage. Its moderate power consumption of 400 µA at 9 V optimises battery life while maintaining a powerful signal.
Its high output - 1.00 V for single notes and 3.00 V for chords - far exceeds that of passive pickups, delivering more presence in every performance.
With an ultra-low noise level (-101 dB), it eliminates interference in the studio and on stage. Its moderate power consumption of 400 µA at 9 V optimises battery life while maintaining a powerful signal.
