EMG - SAX Ivory
79,17 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Guitar Microphone
The EMG SAX X Series captures the clear, balanced sound of the Strat™ with a well-metered midrange output. Whether you're playing funky riffs, blues solos or rock, it stays accurate and breathless. Installation is simple, with no soldering required.
ARTICLE N° 109399
Presentation
With the EMG SAX X Series, you'll find the distinctive character of the Strat enriched by the modern technology of a single active coil. Alnico V magnets ensure a natural balance between low and high frequencies, ideal for expressive blues solos, punchy funk rhythms and even more saturated rock passages.
The X Series preamp offers more headroom and nuance, so you can move easily from soft playing to harder attacks without saturating the sound.
The active VLPF tone control adjusts the high frequencies to suit the style of the track, whether it's soft or more aggressive.
Installation is ultra-simple thanks to the solderless circuit, so there's no need to modify your guitar. Complete and easy to assemble, it integrates seamlessly into your setup and retains the personality of a simple coil, with a slightly richer sound.
The X Series preamp offers more headroom and nuance, so you can move easily from soft playing to harder attacks without saturating the sound.
The active VLPF tone control adjusts the high frequencies to suit the style of the track, whether it's soft or more aggressive.
Installation is ultra-simple thanks to the solderless circuit, so there's no need to modify your guitar. Complete and easy to assemble, it integrates seamlessly into your setup and retains the personality of a simple coil, with a slightly richer sound.
Other features
-
EMG SAX X Series Ivory
-
Single-coil active pickup for 6-string electric guitar
-
Colour: Ivory
-
Magnet type : Alnico V
-
Country of manufacture: USA
-
.
-
EMG solderless connection circuit (Solderless system)
-
Compatible with EMG accessories: EXG, SPC, RPC
-
Compatible with all other EMG microphones
-
Output impedance: 2,000 Ω
-
Resonance frequency: 4.52 kHz
-
Output voltage (single note): 1.00 V
-
Output voltage (strumming): 3.00 V
-
Noise level (60 Hz) : -107 dB
-
Power consumption: ~80 µA
-
Estimated battery life: ~3,000 hours
-
Power supply: 9 V DC (battery not supplied, up to 27 V max)
-
.
-
Active tone control VLPF :
-
Input impedance: 250 kΩ
-
Output impedance: 2 kΩ
-
Noise level : -130 dB
-
Power consumption: 980 μA
-
Operating time: approximately 250 hours
-
.
-
Components included in the kit:
-
1 25 kΩ volume potentiometer
-
1 tone potentiometer (active VLPF)
-
1 power splitter (battery buss)
-
1 stereo output jack
-
1 input/output bus for two microphones
-
1 pair of fixing screws
-
1 microphone cable
-
2 connection cables
-
1 output cable
-
1 battery cable
-
.
-
Dimensions: 86 x 36 x 12 mm
