EMG - Set T Black
123,33 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
EMG's T Pickup Set turns a Telecaster™ into a true groove machine. The Alnico magnet delivers a firm low end and nuanced twang, and that's without acidity. The neck pickup stays clear, never flat. The whole thing connects without soldering, as if by magic. With this model, it's just you, the guitar and clean audio.
ARTICLE N° 109510
Presentation
The EMG T pickup set is aimed at those who no longer want to choose between precision and character. Each pickup sits on an Alnico magnet calibrated to extract the best from your Telecaster™. The FT neck pickup keeps a nice definition in the mids. The treble doesn't bite and the bass pushes straight.
The RT bridge pickup, on the other hand, retains that twang that's instantly recognisable. But it rounds out the top end of the spectrum without ever upsetting the balance. The whole system can be installed without a soldering iron. The EMG solderless system saves time and reduces errors.
The B162(T3) switch distributes signals and the 9V power supply with great stability. Assembly takes less than an hour, even without technical experience. Everything is pre-wired and supplied: stereo jack, 25k potentiometers, cables, diagrams and connectors.
Magnets play an important role here. The Alnico produces a wide dynamic response that's always legible, even when played aggressively. And thanks to the active circuit, no more parasitic noise. The result: a much more expressive Telecaster™, capable of taut blues, dry rock or busy R&B lines.
The RT bridge pickup, on the other hand, retains that twang that's instantly recognisable. But it rounds out the top end of the spectrum without ever upsetting the balance. The whole system can be installed without a soldering iron. The EMG solderless system saves time and reduces errors.
The B162(T3) switch distributes signals and the 9V power supply with great stability. Assembly takes less than an hour, even without technical experience. Everything is pre-wired and supplied: stereo jack, 25k potentiometers, cables, diagrams and connectors.
Magnets play an important role here. The Alnico produces a wide dynamic response that's always legible, even when played aggressively. And thanks to the active circuit, no more parasitic noise. The result: a much more expressive Telecaster™, capable of taut blues, dry rock or busy R&B lines.
Other features
-
EMG Set T Black
-
Active pickups for Telecaster™ guitars
-
Configuration: neck pickup FT + bridge pickup RT
-
Wiring system: EMG solderless
-
Series: EMG T
-
.
-
RT pickup with expressive twang sound
-
Smooth highs, no "ice pick" effect
-
Powerful bass and pronounced sustain
-
Clear, warm and defined FT pickup
-
Wide harmonic response in neck position
-
Alnico magnets for a rich sound
-
Custom-designed EMG windings
-
Wide bandwidth, open tone
-
Suitable for rock, country, blues, R&B
-
Zero noise thanks to active circuit
-
Operates on standard 9V
-
3-position switch included
-
Telecaster™ guitar compatible
-
Quick installation without soldering
-
B162 (T3) switch with 9V distribution
-
Pickup input: pins 1-2 / 4-5
-
Pickup power supply: pins 3 / 6
-
Signal output: pins 7 (GND), 8 (Signal)
-
9V+ battery: pins 9 or 10
-
Pin 10 can be used for EMG accessories
-
Passive compatibility: do not use red pins
-
.
-
Switch B162(T3) is pre-wired
-
No soldering iron required
-
Manual and diagrams included
-
.
-
1 volume potentiometer 25k
-
1 x 25k tone potentiometer
-
1 stereo output jack
-
1 3-position selector + cap
-
2 microphone cables
-
2 connection cables
-
1 output cable
-
1 battery cable
-
.
-
Dimensions (W x H x D): 105 × 33 × 23 mm (approx. per microphone)
-
Total weight: 180 g
