EMG - Set T Black Control Plate
157,50 €
excl VAT
including eco-part : 0,14 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
Add the control plate with these EMG Set T Black microphones and gain in speed. This duo connects without soldering. Each pickup contains a brightly coloured Alnico magnet. No more buzz, no more hassle! You'll enjoy steady bass and smooth highs. Just plug in and breathe.
ARTICLE N° 109513
Presentation
The EMG T pick-up set with control plate is a game-changer from the moment you open the box. Everything is pre-wired, connected and ready to use. There's no soldering iron lying around. Just Alnico magnets and an active circuit that banishes the buzz.
The RT bridge pickup retains the Tele spirit, with a twang that snaps without tearing. The highs breathe more easily, the bass never drools. The FT neck pickup shines with clarity. There's no fuzziness or sharp highs: just a rich, organic response.
The factory-soldered control plate includes a 3-position switch, two EMG 25k potentiometers, a stereo jack and the necessary cables. The 9V power supply is routed via the pre-configured pins, so even the accessory extension is accessible.
The whole thing fits your Telecaster™ without the need to modify the instrument. Alnico magnets add body. They keep a good balance between roundness and articulation. Whether you play edgy rock or more soulful riffs, this kit responds with directness.
The RT bridge pickup retains the Tele spirit, with a twang that snaps without tearing. The highs breathe more easily, the bass never drools. The FT neck pickup shines with clarity. There's no fuzziness or sharp highs: just a rich, organic response.
The factory-soldered control plate includes a 3-position switch, two EMG 25k potentiometers, a stereo jack and the necessary cables. The 9V power supply is routed via the pre-configured pins, so even the accessory extension is accessible.
The whole thing fits your Telecaster™ without the need to modify the instrument. Alnico magnets add body. They keep a good balance between roundness and articulation. Whether you play edgy rock or more soulful riffs, this kit responds with directness.
Other features
-
EMG Set T Black Control Plate
-
Active pickups for Telecaster™ guitars
-
Configuration: neck pickup FT + bridge pickup RT
-
Wiring system: EMG solderless
-
Series: EMG T
-
With solderless control plate
-
.
-
RT pickup with expressive twang
-
Smooth highs, no "ice pick" effect
-
Powerful bass and pronounced sustain
-
Clear, warm and defined FT pickup
-
Wide harmonic response in neck position
-
Alnico magnets for a rich sound
-
Custom-designed EMG windings
-
Wide bandwidth, open tone
-
Suitable for rock, country, blues, R&B
-
Zero noise thanks to active circuit
-
Operates on standard 9V
-
3-position switch included
-
Telecaster™ guitar compatible
-
Quick installation without soldering
-
B162 (T3) switch with 9V distribution
-
Pickup input: pins 1-2 / 4-5
-
Pickup power supply: pins 3 / 6
-
Signal output: pins 7 (GND), 8 (Signal)
-
9V+ battery: pins 9 or 10
-
Pin 10 can be used for EMG accessories
-
Passive compatibility: do not use red pins
-
.
-
Switch B162(T3) is pre-wired
-
No soldering iron required
-
Manual and diagrams included
-
.
-
1 volume potentiometer 25k
-
1 x 25k tone potentiometer
-
1 stereo output jack
-
1 3-position selector + cap
-
2 microphone cables
-
2 connection cables
-
1 output cable
-
1 battery cable
-
.
-
Dimensions (W x H x D): 105 × 33 × 23 mm (approx. per microphone)
-
Total weight: 180 g
