Hifi Cartridge

The Goldring E1 is a phono cell equipped with Magnetic Duplex™ technology, which improves channel separation and soundstage. Its lightweight body incorporates a bonded spherical stylus mounted on a carbon cantilever, ensuring stable and reliable playback. With expert factory azimuth adjustment, it ensures consistent channel balance and smooth performance.

ARTICLE N° 123060
The Goldring E1 is a phono cell designed to deliver reliable, balanced sound reproduction. It incorporates Magnetic Duplex™ technology, which accurately reproduces the geometry of the original recording head. This system improves channel separation and helps to reproduce a more coherent and immersive soundstage.

Its compact body houses a glued spherical stylus mounted on a carbon cantilever. This design choice ensures stable playback and good durability, while maintaining a total weight of 6.8 g. The cartridge is factory-set to an optimised azimuth, ensuring a constant balance between channels and consistent performance without further adjustment.

The 15 µm tracking radius allows accurate groove reading, while the frequency range from 12 Hz to 20 kHz covers the entire audible spectrum. Sensitivity of 3.5 mV and channel separation of 20 dB ensure clear, defined reproduction.

The Goldring E1 combines simplicity of use with technical quality, offering vinyl lovers an effective solution for getting the most out of their records.
Type of set
 Cell + Diamond
Cell
 Moving magnet
Cartridge format
 MM
Magnet
 Mobile (MM)
Weight
 6 g
Frequency response, low limit
 20 Hz
Frequency response, upper limit
 20 kHz
Packaging
 Single unit
Color
 Red
  • Goldring E1
  • Phono cell
  • Colour: Red
  • Cantilever: Carbon
  • Stylus type: Spherical bonded, replaceable
  • Tracking radius: 15 µm (0.6 mil)
  • Equivalent tip mass: 0.7 mg
  • Frequency response: 20 Hz - 20 kHz ± 3 dB
  • Frequency range: 12 Hz - 20 kHz
  • Channel imbalance: 1.5 dB max at 1 kHz
  • Channel separation: 20 dB min at 1 kHz
  • Sensitivity: 3.5 mV ± 3 dB at 5 cm/s lateral
  • Static compliance: 20 mm/N
  • Trackability: 70 µm
  • Vertical tracking angle: 24
  • Load resistance: 47 kΩ
  • Load capacitance: 100 - 200 pF (150 pF nominal)
  • Internal inductance: 400 mH
  • Internal resistance: 470 Ω
  • Height: 17 mm
  • Reading weight: 1.75 - 2.25 g (2 g nominal)
  • Mounting centre: 12.7 mm
  • Compatible arms: 10 - 30 g
  • Cell weight: 6.8 g (7.8 g with fixings)
The Goldring E1 is suitable for entry-level and mid-range vinyl decks, offering simple and reliable levelling. It's perfect for music lovers looking for a practical cartridge for even, balanced listening.
goldring - E1
goldring - E1
58,33 € excl VAT
including eco-part : 0,14 €
Out of stock
Contact us for delivery times
Guarantee 3  years
Quentin
Quentin
Léon
Léon
Do you need help?

Spotlight on