goldring - E3
108,33 €
excl VAT
including eco-part : 0,14 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Quentin
Léon
Do you need help?
Hifi Cartridge
Goldring's E3 is a phono cell with a super-elliptical bonded contact stylus and aluminium cantilever, designed to extract maximum information from the record groove. Its dual-magnet Magnetic Duplex™ technology ensures channel separation of at least 20dB and a frequency response of 20Hz to 20kHz, for accurate and balanced stereo reproduction.
ARTICLE N° 123065
Presentation
The Goldring E3 is based on Magnetic Duplex™ technology, a dual-magnet generator whose geometry faithfully reproduces that of the original pickup. This design accurately reproduces the stereo information contained in the groove, with channel separation of at least 20dB and imbalance limited to 1.5dB.
Its super-elliptical stylus mounted on an aluminium cantilever offers a contact radius of 10 µm, allowing more detail to be extracted from the record. The integrated micrometric adjustment screw ensures a pre-calibrated playback angle of 24°, eliminating the need for horizontal adjustment during installation.
With a nominal holding force of 2 g and compatibility with arms from 10 to 30 g effective mass, the cell ensures stable and consistent tracking throughout its lifetime.
Its super-elliptical stylus mounted on an aluminium cantilever offers a contact radius of 10 µm, allowing more detail to be extracted from the record. The integrated micrometric adjustment screw ensures a pre-calibrated playback angle of 24°, eliminating the need for horizontal adjustment during installation.
With a nominal holding force of 2 g and compatibility with arms from 10 to 30 g effective mass, the cell ensures stable and consistent tracking throughout its lifetime.
Features
Type of set
Cell + Diamond
Cell
Moving magnet
Cartridge format
MM
Magnet
Mobile (MM)
Weight
6 g
Frequency response, low limit
20 Hz
Frequency response, upper limit
20 kHz
Packaging
Single unit
Color
Purple
Other features
-
Goldring E3
-
Phono cell
-
Cell type : MM (Moving Magnet)
-
Technology : Magnetic Duplex Technology™
-
Colour : Violet
-
Cantilever type: Aluminium
-
Diamond type : Bonded Elliptical
-
Reading radius: 10 µm (0.4 mil)
-
Equivalent tip mass: 0.7 mg
-
Frequency response: 20 Hz - 20 kHz ±3 dB
-
Bandwidth: 12 Hz - 25 kHz
-
Channel imbalance: 1.5 dB max at 1 kHz
-
Channel separation: 20 dB min at 1 kHz
-
Output level: 3.5 mV ±3 dB at 5 cm/s lateral
-
Static compliance: 20 mm/N
-
Trackability: 70 µm
-
Vertical tracking angle: 24
-
Load resistance: 47 kΩ
-
Load capacitance: 100 - 200 pF (150 pF nominal)
-
Internal inductance: 400 mH
-
Internal resistance: 470 Ω
-
Weight with fixings: 7.8 g
-
Fixing centre distance: 12.7 mm
-
Recommended holding force: 1.75 - 2.25 g (2 g nominal)
-
Cell height: 17 mm
-
Recommended effective arm mass: 10 - 30 g
-
Cell mass: 6.8 g
To find out more...
The Goldring E3 is aimed at audiophiles wishing to replace an entry-level cartridge or upgrade a mid-range turntable without modifying their existing tone arm. It's also ideal for regular, attentive listening to a wide range of vinyl collections, where the precision of the super-elliptical stylus means you can take full advantage of the information engraved in the groove.
