LEHLE - 1AT3 SGOS
165 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 3 days
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Electric Guitar Effects
Programmable switch designed for connecting three amplifiers, which can then be switched freely. Combined with an active switching noise suppression system, the gold contact relays switch not only the signal, but also the signal ground. This means there is no ground loop when switching between outputs A, B and C.
ARTICLE N° 82516
Presentation
Output C can be used as an effects loop for amp B by combining it with jack C>B, thus excluding any unused effects from the signal flow.
You can also connect a tuner to output A to remove yet another element from the signal stream.
You can also connect a tuner to output A to remove yet another element from the signal stream.
Other features
-
LEHLE 1AT3 SGOS
-
Pedal Switch
-
1 input to 3 outputs
-
With loop for one instrument with up to three amps
-
Routes the input signal as true bypasses via gold-plated relays to up to three outputs (amps, tuner, effects)
-
If the input signal is always routed to only one of the outputs, then the ground connections will be permanently live to exclude hum
-
Output C and connection C->B can be used as an effects loop
-
Round-trip switching between the pure original signal and the effect loop
-
Controllable via MIDI
-
Can be networked with other Lehle SGoS selectors
-
Connections :
-
Input: 6.35 mm jack
-
Outputs: 5 x 6.35 mm jack
-
Power supply: 8-20V DC (negative centre) (adapter sold separately)
-
Dimensions: 156 x 103 x 47 mm
-
Weight: 314 g
To find out more...
Like all products in the SGoS series, the Lehle 1at3 SGoS is extremely easy and intuitive to program.
It features a 3-pin jack socket called Remote for communication with other SGoS switchers or direct connection to MIDI controllers via a simple stereo cable.
You can use the Lehle 1at3 SGoS as a stand-alone device or control it remotely using MIDI Program Change commands.
It features a 3-pin jack socket called Remote for communication with other SGoS switchers or direct connection to MIDI controllers via a simple stereo cable.
You can use the Lehle 1at3 SGoS as a stand-alone device or control it remotely using MIDI Program Change commands.
