FILTER
FILTER
Old Blood Noise Endeavors - Beam Splitter V2 Cool
357,50 €
excl VAT
Out of stock
Satisfied or your money back until 15/01/2027*.
Guarantee 3
years
Add more depth to your guitar sound with the Old Blood Noise Endeavors Beam Splitter V2 Cool pedal. Its three saturation circuits operate in parallel to create a range of textures, from a clear, bright tone to heavier distortion. The built-in delays add movement and depth, with the option to play in either mono or stereo.
ARTICLE N° 129197
Presentation
The Old Blood Noise Endeavors Beam Splitter V2 Cool overdrive and distortion pedal is designed for guitarists who want to build a richer sound from a single signal. It splits the signal across three independent saturation circuits, each with its own Gain, Volume and Tone controls.
The first produces hard-clipping distortion, the second combines soft and hard clipping for a clearer, brighter tone, whilst the third utilises transistor-based saturation, which is particularly responsive to playing nuances and resembles the character of a fuzz pedal.
Two independent delay lines further enrich these three voices. Their Time and Feedback controls adjust the delay time – up to 211 ms – and the number of repeats, respectively. The Delay Select switch determines which voices are delayed, whilst Deviate randomly varies the delay time to create a more irregular movement, similar to a chorus effect.
The Spread control, meanwhile, adjusts the stereo spread. Depending on your setup, the signals can be routed in parallel in mono, split across stereo channels, or separated across three outputs using Old Blood Noise Endeavors’ proprietary Trereo system. These possibilities open the door to classic overdrive sounds, as well as flanging, lo-fi vibrato and slapback effects.
The Beam Splitter V2 Cool features three footswitches with selectable functions. It also accepts an expression pedal to control all the knobs and supports MIDI control of all its parameters.
Up to three presets can be saved directly on the pedal, with the option to manage up to 127 via MIDI. Finally, you can choose between a soft-touch relay True Bypass and a Buffered Trails mode that preserves the repeats when the effect is switched off.
The first produces hard-clipping distortion, the second combines soft and hard clipping for a clearer, brighter tone, whilst the third utilises transistor-based saturation, which is particularly responsive to playing nuances and resembles the character of a fuzz pedal.
Two independent delay lines further enrich these three voices. Their Time and Feedback controls adjust the delay time – up to 211 ms – and the number of repeats, respectively. The Delay Select switch determines which voices are delayed, whilst Deviate randomly varies the delay time to create a more irregular movement, similar to a chorus effect.
The Spread control, meanwhile, adjusts the stereo spread. Depending on your setup, the signals can be routed in parallel in mono, split across stereo channels, or separated across three outputs using Old Blood Noise Endeavors’ proprietary Trereo system. These possibilities open the door to classic overdrive sounds, as well as flanging, lo-fi vibrato and slapback effects.
The Beam Splitter V2 Cool features three footswitches with selectable functions. It also accepts an expression pedal to control all the knobs and supports MIDI control of all its parameters.
Up to three presets can be saved directly on the pedal, with the option to manage up to 127 via MIDI. Finally, you can choose between a soft-touch relay True Bypass and a Buffered Trails mode that preserves the repeats when the effect is switched off.
Other features
-
Old Blood Noise Endeavors Beam Splitter V2 Cool
-
Overdrive and distortion pedal with 3 parallel circuits
-
Saturation circuits: 3
-
Drive 1: hard-clipping distortion
-
Drive 2: soft- and hard-clipping overdrive
-
Drive 3: transistor-based overdrive with dynamic response and a fuzz-like texture
-
Controls per circuit: Gain, Volume, Tone
-
Delays: 2 independent
-
Delay controls: Time, Feedback
-
Maximum delay time: 211 ms
-
Deviate control: random variation in delay time
-
Spread control: stereo width
-
Delay Select switch: selection of circuits to which delays are applied
-
Input: mono or stereo
-
Stereo input: converted to mono when the pedal is engaged
-
Outputs: mono, stereo or Trereo
-
Footswitches: 3, with selectable functions
-
External control: expression pedal
-
MIDI control: all parameters
-
Presets: up to 3 built-in and 127 via MIDI
-
Switching: True Bypass or Buffered Trails
-
Power supply: 9 V DC, centre negative, 2.1 mm connector
-
Current draw: 350 mA
-
Power supply (sold separately)
-
Manufactured in the USA
To find out more...
- Three distinct distortion tones combined in a single pedal
- Independent controls to adjust the gain, volume and tone of each circuit
- Two separate delay units to enrich the distortion with repeats and modulation effects
- Adjustable delay time up to 211 ms
- Effects include chorus, flanging, lo-fi vibrato and slapback
- Choice of mono, stereo or Trereo outputs for different playing set-ups
- Control of settings via expression pedal and MIDI
- Storage of 3 presets directly on the pedal and up to 127 via MIDI
- Three footswitches with selectable functions
- Choice between True Bypass and Buffered Trails
- Independent controls to adjust the gain, volume and tone of each circuit
- Two separate delay units to enrich the distortion with repeats and modulation effects
- Adjustable delay time up to 211 ms
- Effects include chorus, flanging, lo-fi vibrato and slapback
- Choice of mono, stereo or Trereo outputs for different playing set-ups
- Control of settings via expression pedal and MIDI
- Storage of 3 presets directly on the pedal and up to 127 via MIDI
- Three footswitches with selectable functions
- Choice between True Bypass and Buffered Trails
You may also like
Spotlight on
Equivalent products
Old Blood Noise Endeavors - Beam Splitter V2 Cool
357,50 € excl VAT