Prism Sound - Lyra 2
This product is no longer available for sale
These models in stock may be of interest to you:
2 325 €
excl VAT
including eco-part : 0,07 €
Guarantee 2
years
Anais
Tristan
Do you need help?
Audio Interfaces
The Prism Sound Lyra 2 is a USB2 stereo audio interface, in 24 bit / 192kHz with 6 analog inputs / outputs, 48V phantom power, Word Clock and digital input / output in SPDIF and coaxial. Its UAC2 (USB Audio Class 2) port is natively compatible on Mac, Linux, Android, and in Windows via ASIO / Core driver. The Lyra 2 interface is based on the signal path, the same fully symmetrical architecture, and the clock circuits of the Orpheus interface, but in a smaller format for those that do not need eight input channels. analog outputs. Prism Sound's Lyra 2 comes with a controller software, which opens to the screen as a separate panel, from your editing software.
ARTICLE N° 57353
Other features
-
Prism Sound Lyra 2 Stereo USB2 audio interface, in 24 bit / 192kHz with 6 analog inputs / outputs, 48V phantom power, Word Clock and digital input / output in SPDIF and coaxial.
-
Prism Sound audio quality without compromise.
-
Native USB Interface (UAC2).
-
ASIO and WDM drivers for Windows (32 and 64 bits).
-
Native CORE AUDIO on Mac OS X.
-
UAC2 operation on Linux (no control panel support).
-
Ethernet interface with low latency AVB functionality.
-
Two high quality Prism Sound A / D channels.
-
Two integrated high-end mic preamps (average -130 dBu EIN).
-
Mic inputs with switchable phantom power and 20 dB pads.
-
MS Matrix on Microphone Inputs.
-
Two high impedance instrument inputs on the front panel.
-
Prism Sound "Overkillers" to flexibly control transient overloads.
-
Four high quality Prism Sound D / A channels, plus an independent stereo headphone D / A converter.
-
Selectable outputs between the station bus and the Lyra mixer.
-
New high-performance headphone output with volume control on the front panel.
-
digital I / O.
-
S / PDIF on RCA / phono and TOSLINK connectors.
-
E / SS / PDIF stereo or 8-channel ADAT supported on TOSLINK optical connectors.
-
AES3 mode with I / O via an RCA / XLR adapter.
-
High Quality Integrated Sample Rate Conversion.
-
Prism Sound SNS noise shaping on digital outputs (4 curves).
-
word-clock synchronization I / O.
-
Low-latency digital mixer with "console quality" for feedback control.
-
Fader, pan, cut, solo on each channel of the mixer.
-
Master volume control on the front panel, attributable to some channels.
-
State-of-the-art clock generation with proprietary 2-phase hybrid DPLL.
-
Fully floating (isolated) symmetric architecture for optimal noise elimination.
