KMA Machines - Tyler Deluxe Advanced Frequency Splitter
229,17 €
excl VAT
including eco-part : 0,90 €
Out of stock
Guarantee 3
years
Fred
Eric
Do you need help?
Electric Guitar Effects
The heart of the Tyler Deluxe is made up of filter sections that separate your signal into different loops, passing through high-pass and low-pass filters, each filter having a threshold of 12dB/oct with a variable frequency from 20Hz to 3kHz. It features relay switches, an internal amplifier to increase headroom for hotter input signals and low-noise operational amplifiers to improve overall signal quality.
ARTICLE N° 83565
Presentation
The first Tyler, a 2-channel active signal splitter, found its way onto the pedalboards of a good number of guitarists and bassists, and it was on the basis of their feedback that KMA Machines created an even more flexible and versatile solution.
The rest of its vital components have been updated, with two send outputs that have their own phase inversion selector, a Clean setting for metering the original signal, a master phase selector, LP-Cut and HP-Cut selectors and silent relay footswitches.
The rest of its vital components have been updated, with two send outputs that have their own phase inversion selector, a Clean setting for metering the original signal, a master phase selector, LP-Cut and HP-Cut selectors and silent relay footswitches.
Other features
-
KMA Machines Tyler Deluxe
-
Effect pedal for electric guitar
-
Type : Advanced Frequency Splitter
-
True bypass with silent relay
-
Hand-built in Berlin, Germany
-
2-channel signal splitter: 12 dB/oct adjustable with high-pass and low-pass filters
-
Fully isolated effects loop send outputs
-
Clean and Mix controls for bass and treble control
-
Dedicated loop phase inverters
-
Silent relay footswitch
-
Separate effects loop with buffer for each filter
-
Active level control for up to 12dB boost
-
Controls: low pass, high pass, level, clean, mix
-
Switch lp cut
-
Switch main phase
-
Switch hp cut
-
Connections :
-
Input: 6.35 mm mono jack
-
Output: 6.35 mm mono jack
-
LP Send / Return : 2 jack 6,35 mm mono
-
HP Send / Return: 2 x 6.35 mm mono jacks
-
Power connector: 2.1 x 5.5 mm cylindrical plug, negative centre (standard 9 V)
-
Power supply: 9V adapter, sold separately
-
Dimensions: 145 x 121 x 60 mm
-
Weight: 590 g
To find out more...
Tyler Deluxe controls :
Low Pass: Sets the low-pass cutoff frequency between 3kHz and 20Hz
High Pass: Sets the high-pass cut-off frequency between 3kHz and 20Hz
Mix: Adjusts the ratio of the low-pass and high-pass channels: all the way to the left 100% LP, in the middle 50/50, all the way to the right 100% HP
Level: adjusts the overall volume with amplification up to 12 dB
Clean: Mixes the clean signal
LP Cut switch: cuts the clear low-pass signal in the low position
HP Cut switch: cuts the clear high-pass signal in the down position
LP Phase switch: Switches the phase of the low-pass loop
HP Phase switch: Switches the phase of the high-pass loop
Main Phase switch: Switches the phase of the main signal
internal control :
Ground-Lift: Set to ON to connect the respective transformer to the main ground (1: HP / 2: LP)
Low Pass: Sets the low-pass cutoff frequency between 3kHz and 20Hz
High Pass: Sets the high-pass cut-off frequency between 3kHz and 20Hz
Mix: Adjusts the ratio of the low-pass and high-pass channels: all the way to the left 100% LP, in the middle 50/50, all the way to the right 100% HP
Level: adjusts the overall volume with amplification up to 12 dB
Clean: Mixes the clean signal
LP Cut switch: cuts the clear low-pass signal in the low position
HP Cut switch: cuts the clear high-pass signal in the down position
LP Phase switch: Switches the phase of the low-pass loop
HP Phase switch: Switches the phase of the high-pass loop
Main Phase switch: Switches the phase of the main signal
internal control :
Ground-Lift: Set to ON to connect the respective transformer to the main ground (1: HP / 2: LP)
