Rme - ADI-192 DD
These models in stock may be of interest to you:
The ADI-192 DD is an 8-channel AES / Adat / TDIF converter with digital sampling formats and frequencies that include many features. With the ADI-192 DD, RME presents the successor of the popular ADI-8 DD. This completely new design camera has been designed with the ambition of becoming the most powerful format converter of all time. Thus this device does not only have some improvements over the ADI-8 DD, but also some unique specifications in the world.
Other features
-
RME ADI-192 DD
-
8-channel converter
-
Converter of formats and digital sampling frequencies integrating many functionalities:
-
ADAT, TDIF and AES formats up to 192 kHz.
-
8 channels of sampling frequency conversion up to 192 kHz without phase error.
-
Frequency conversion selection in AES, TDIF or ADAT format.
-
SteadyClock for maximum jitter suppression and clock regeneration.
-
Triple format conversion AES / TDIF / ADAT and SPDIF TOSLINK.
-
Direct support for Dual and Quad Wire, S / MUX and S / MUX4 modes. even in the sampling rate conversion mode.
-
Word-Clock TDIF output.
-
1U rack format
-
Specifications:
-
AES / EBU input: 4 x XLR, transformer balanced, high sensitivity (<0.3 Vpp), S / PDIF compatible, max. 192 kHz Single Wire
-
AES / EBU output: 4 x XLR, balanced on transformer, 4.5 Vpp, max. 192 kHz Single Wire
-
ADAT optical input: 2 x TOSLINK, 24-bit, PLL
-
bitclock ADAT optical output: 2 x TOSLINK, 24-bit
-
TDIF input / output: 2 x D-sub 25 pin, 24-
-
bit S / PDIF input / output front panel: 2 x TOSLINK, 24-bit, max. 192 kHz
-
Word-Cloc input k: (threshold 1.2 Vpp)
-
Word-Clock output: BNC, low impedance, 4 Vpp under 75 Ohms, short-circuit protected
-
Sync sources: Internal, ADAT optical , AES / EBU, TDIF, word clock
-
Varipitch: by input signal or word clock
-
Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (sync / word clock)
-
Frequency tolerance: AES, word clock: 28 kHz-204 kHz, ADAT / TDIF 30 kHz - 54 kHz
-
Jitter: internal clock <1 ns, external clocks <1 ns
-
Jitter removal:> 30 dB (2.4 kHz)
-
Dynamic range of the SRC: 140 dB RMS unweighted, 143 dBA
-
SRC DHT + B: <-140 dB
-
Frequency ratio: max. 7: 1/1: 7
-
Power supply: 100V - 240V AC, 20 Watts
-
Dimensions: 483 x 44 x 200 mm
Spotlight on
Since 1996, RME has been providing high-quality equipment for computer-based music recording (CBR): Converters, USB, FireWire and/or Thunderbolt audio interfaces with built-in DSP, which together with TotalMix FX offer numerous mixing, effects and even remote control features. The majority of RME's products are Mac, PC and iOS compatible, giving you the freedom to record and produce, wherever the music takes you. Whether it's for the stage or studio, you can count on your RME audio equipment to deliver the quality and reliability you expect.
