Rme - Digiface USB
RME's Digiface USB is a 66-channel USB 2.0 audio interface with a resolution of up to 192 kHz. Extremely compact and portable, equipped with 4 ADAT / SPDIF optical inputs / outputs, and a high quality analog line / headphone output on Jack TRS, the Digiface USB continues the legacy of RME's famous Digiface HDSP. Its small size, its lightness and its self-feeding by the bus make the Digiface USB extremely versatile and useful. It can also be used as a simple headphone amplifier for mobile use.
Specifications
-
RME Digiface USB.
-
32 input channels / 32 output channels.
-
Stereo headphone output on Jack TRS.
-
4 x ADAT and SPDIF inputs / outputs.
-
Self-powered by the USB bus.
-
Sampling rate from 28 to 200 KHz.
-
1 stereo headphone Jack TRS 6.3mm output.
-
Clock: internet, ADAT input, SPDIF input.
-
Jitter 1ns on all entries.
-
TotalMix mixing matrix 2244 channels in 46 bits.
-
DIGICheck DSP.
-
Option: Advanced USB remote control (connected via computer).
-
Digital Input
-
Optical Inputs ADAT / SPDIF
-
4 x TOSLINK, Alesis
-
format Compatible with SPDIF according to IEC 60958
-
Standard: 32 channels 24 bits, up to 48 kHz
-
Double Speed (S / MUX): 16 channels 24 bits 96 kHz
-
Quad Speed (S / MUX4): 8 channels 24 bits 192 kHz
-
Locking range: 31.5 kHz - 50 kHz
-
Jitter when sync to the input signal <1 ns
-
Digital Output ADAT / SPDIF Optical Output
-
4 x TOSLINK, Alesis
-
Format SPDIF Compatible to IEC 60958
-
Standard: 32-channel 24-bit, up to 48 kHz
-
Double Speed (S / MUX): 16 24-bit 96 kHz channels
-
Quad Speed (S / MUX4): 8 channels 24 bits 192 kHz
-
Clock: Internal, ADAT input, SPDIF input
-
Low jitter design <1 ns in PLL mode, on all
-
inputs Internal Clock: 800 ps Jitter, Random Spread Spectrum
-
Suppression of Ji clock on the external clock> 30 dB (2.4 kHz)
-
Sampling rate 28 kHz to 200 kHz
-
Analog outputs
-
Analog Headphone Output 33/34
-
Dynamic Range (DR): 110 dB RMS unweighted, 113 dBA
-
Frequency Response @ 44.1 kHz, -0.5 dB: 0 Hz - 20.8 kHz
-
Frequency Response @ 96 kHz, -0.5 dB: 0 Hz - 45 kHz
-
Frequency Response @ 192 kHz, -1 dB : 0 Hz - 89 kHz
-
THD @ -1 dBFS: - 96 dB, 0.0016%
-
THD + N @ -1 dBFS: -95 dB, 0.0017%
-
Channel separation> 100 dB
-
Output: Jack TRS 6.3 mm, unbalanced
-
Output impedance: 2 Ohm
-
Output level at 0 dBFS, 1 kOhm Load: +9.5 dBu
-
Max power @ 0.1% THD: 50 mW
-
Power supply
-
Self-powered by bus USB
Information
You may also like
Spotlight on
Since 1996, RME has been providing high-quality equipment for computer-based music recording (CBR): Converters, USB, FireWire and/or Thunderbolt audio interfaces with built-in DSP, which together with TotalMix FX offer numerous mixing, effects and even remote control features. The majority of RME's products are Mac, PC and iOS compatible, giving you the freedom to record and produce, wherever the music takes you. Whether it's for the stage or studio, you can count on your RME audio equipment to deliver the quality and reliability you expect.