AKG - Pack C214 + Pied + Filtre Anti Pop+ Câble
AKG C214 condenser mic kit + telescopic boom mic stand + pop filter + XLR cable. A low-cost version of the famous C414, the C214 is used by sound engineers in recording studios and on stages around the world. It features the same one-inch capsule, but in a single-diaphragm configuration, with a cardioid polar pattern. The addition of a -20dB attenuation pad and a low-cut filter enables it to pick up proximity recordings more effectively.
Composition of the package
Presentation
Its low-noise electronic circuit offers high sensitivity, which is one of the reasons why the capsule has an internal suspension designed to reduce mechanical and handling noise.
Other features
-
AKG C214 Bundle
-
Microphone + Stand + Pop Filter + Cable set including :
-
AKG C214
-
Condenser microphone
-
Principle: backplate system with large 25 mm diaphragm based on the pressure gradient principle
-
Directivity: cardioid
-
Sensitivity (open circuit voltage): 20 mV/Pa (-24 dBV ± 0.5 dB)
-
Frequency response: 20 to 20,000 Hz (see response curve)
-
Electrical impedance: ≤ 200 ohms
-
Recommended load impedance: ≥ 100 ohms
-
Bass reduction filter slope: 6 dB/octave at 300 Hz
-
Pre-attenuation: 0 / -20 dB, switchable
-
Equivalent noise level to IEC 60268-4 (A-weighted): 13 dB-A (0 dB pre-attenuation)
-
Signal-to-noise ratio at 1 Pa (A-weighted): 81 dB
-
Maximum sound pressure level for 0.5% distortion per harmonic: 136 / 156 dB SPL (0 / -20 dB)
-
Dynamic range (A-weighted value): 123 / 143 dB (0 / -20 dB)
-
Tolerated climatic conditions: Temperature: -10°C to +60°C
-
Relative humidity: 95% (+20°C), 85% (+60°C)
-
Supply voltage: Phantom power, 12 - 52 V, in accordance with IEC 61938 standard
-
Power consumption: < 2 mA
-
Connector: XLR-3 type to IEC standard
-
External dimensions: 54 x 43 x 160 mm
-
Net weight: 290 g
-
Plugger Pop Filter
-
Eliminates plosives
-
Fits all microphones
-
Lined nylon mesh
-
Flexible arm
-
Fits on a microphone stand
-
K&M 210/2 Black
-
Telescopic microphone stand on tripod + boom
-
Stand height: 900 to 1605 mm
-
Boom length: 840 mm
-
3/8" thread
-
Black finish
-
Weight: 3.2 kg
-
XLR PLUGGER cable
-
Length 10 metres
-
1.5mm² cross-section
-
OD6 diameter
-
Connections :
-
XLR male 3-pin
-
XLR female 3-pin
-
Easy range
To find out more...
Videos
You may also like
Spotlight on
Founded in 1947 in Vienna, AKG is today one of the major players in the world of audio, with references for microphones and headphones used in the world's largest recording studios. These include the C414 condenser microphone, the small C451 diaphragm and the K series of monitoring headsets.
Since its acquisition by Harman International in 1994, AKG has continued to innovate with new stage microphones, analog and digital wireless systems, the Perception Series, and collaborations with artists such as Tiësto on DJ headphones.
