Empress Effects - Buffer +
145,83 €
excl VAT
including eco-part : 0,90 €
Out of stock
Guarantee 3
years
Fred
Eric
Do you need help?
Electric Guitar Effects
The Buffer + has been designed to be the complete input/output interface for your pedalboard, while maintaining the highest fidelity to your guitar signal. Signal loss due to long, poorly insulated cables is a problem that has plagued guitarists for decades. The main aim of the buffer + is to eliminate this signal loss, ensuring that your tone is not altered by your cables. What's more, all your pedalboard connectivity is centralised to make installation quick and easy. The buffer + also has a very practical set of features to make life easier. Noise filters, input pads and a switchable clean boost are all powerful tools available on the buffer +.
ARTICLE N° 73719
Presentation
- All the way to the analogue signal!
- All the connections to your pedalboard are in one place: Makes installation and removal quick and easy.
- Switchable boost: dial in up to 30dB of clean boost and switch on and off with the soft-touch footswitch.
- A separate tuner output keeps your tuner out of the audio path.
- Tuner Mute: Hold the foot switch for one second and mute the amp output for tuning.
- Noise Filters: Similar to Dolby noise filter technology, choose from 2 different noise filters to remove unwanted noise from your effects chain.
- Input pad: Ideal for matching the outputs of different guitars, reducing the active signal or boosting your effects signal to improve the signal-to-noise ratio.
- All the connections to your pedalboard are in one place: Makes installation and removal quick and easy.
- Switchable boost: dial in up to 30dB of clean boost and switch on and off with the soft-touch footswitch.
- A separate tuner output keeps your tuner out of the audio path.
- Tuner Mute: Hold the foot switch for one second and mute the amp output for tuning.
- Noise Filters: Similar to Dolby noise filter technology, choose from 2 different noise filters to remove unwanted noise from your effects chain.
- Input pad: Ideal for matching the outputs of different guitars, reducing the active signal or boosting your effects signal to improve the signal-to-noise ratio.
Other features
-
Empress Effects Buffer +
-
Signal adaptation pedal
-
Type : Buffer,
-
Canadian design and manufacture
-
Controls : Boost, input loading
-
Switch input : -3dB /0dB / +3dB
-
Switch noise filter : little / none / lots
-
Input impedance : 10 kΩ //1 MΩ
-
Output impedance : 510 Ω
-
Frequency response : 5 Hz // 40 kHz
-
Power consumption : ~ 86mA
-
Total harmonic distortion: 0.02
-
Signal-to-noise ratio : 105.3 dB
-
Connections Inputs / Outputs: 6.35 mm jack
-
Tuner output: 6.35 mm jack
-
Power supply: Mains adapter supplied separately
-
Dimensions: 114 x 64 x 32 mm
