Home
Rays
Sound system
Deejay
Lighting
Homestudio
Musical Instruments
Hifi & Video
Cables
Truss
Flight Case
Neumann
Satisfied or your money back for up to 45 days
Guarantee 3 years
KH 810 Neumann KH 810 Neumann KH 810 Neumann KH 810 Neumann KH 810 Neumann
KH 810 Neumann
KH 810 Neumann
KH 810 Neumann
KH 810 Neumann
KH 810 Neumann
2 082,50 € excl VAT
including eco-part : 0,90 €
Guarantee 3  years
Anais
Anais
Tristan
Tristan
Do you need help?
Studio Monitors

The Neumann KH 810 is an active 10" studio subwoofer. It features a high-definition 7.1 System Manager. With a frequency response of between 18Hz and 300Hz, the KH 810 delivers 200W of power. Its latest-generation high-efficiency amplifiers and acoustic components, particularly the long-travel transducer, have been chosen to ensure the most accurate reproduction possible.

ARTICLE N° 63199
Other features
|Presentation
The KH 810 features a 7.1 High Definition Bass Manager with remote volume control, four routing modes, fourth-order crossovers and adaptable acoustic controls. From Mono to 3D, the KH 810 can be used in many different configurations.

The KH 810 responds to increasing technological demands by offering a new 7.1 High Definition Bass Manager™. This is compatible with all standard consumer formats, from mono to the latest 7.1 HD systems. Eight analogue channels provide versatile interconnectivity for modern studios.

Other features

  • Neumann KH 810
  • Active subwoofer
  • Frequency response in free field, at ±6 dB 16 Hz to 600 Hz
  • Frequency response in free field, at ±3 dB 18 Hz to 300 Hz
  • THD < 0.5% at 95 dB SPL at 1 m >45 Hz
  • Maximum SPL in half-space, for 3% THD at 1 m, averaged between 50 Hz and 100 Hz 110.7 dB SPL
  • Maximum SPL level with pink noise in half a space at 1 m, linear 112 dB SPL
  • Electronic characteristics
  • Amplifier, continuous output power (peak) 160 W (200 W)
  • THD and noise at continuous power < 0.1% (-60 dB) with limiter off
  • Analogue controller type, active
  • Main channel crossover frequency 80 Hz
  • Crossover slope 24 dB/oct. 4th order
  • Acoustic setting LOW CUT9 centre frequency = 30 Hz
  • Q factor = 1.5 Gain range = 0 to 12 dB
  • Acoustic setting PARAMETRIC EQUALIZER 0 "bypassable
  • gain = +4 to 12 dB frequency = 20 Hz to 120 Hz Q factor = 1 to 8
  • Adjustable phase adjustment 0º to -315º, adjustable in 45º steps
  • Output level adjustment (for a 0 dBu input signal, at 1 m in free-field conditions) 94 dB SPL, 100 dB SPL, 108 dB SPL, 114 dB SPL
  • Input sensitivity -12 dB ... +2 dB
  • Peak limiter and thermal limiter protection circuits
  • Subsonic filter: cut-off frequency; slope 6.5 Hz; 12 dB/oct.
  • REMOTE CONTROL E socket (6.3 mm jack) via remote control cable
  • Analogue inputs and outputs
  • Analogue input(s) 8 x XLR: electronically balanced analogue
  • Analogue input impedance >13k Ohms
  • Max. input level +19 dBu
  • Common mode rejection ratio (CMRRR) > 56 dB @ 15 kHz
  • Crosstalk (1 kHz), level matching -95 dB; ±0.1 dB
  • Volume control NRC 1 hardware remote control or RS-232
  • Volume control range; resolution 118 dB; 0.25 dB
  • Analogue dynamic range; THD+N 119 dB(A); <0.001 % (-100 dB)
  • Signal routing modes LFE 80+re-routing; LFE 80 Hz; LFE 120 Hz; LFE 120 Hz; Wide
  • LFE gain 0 / +10 dB
  • Analogue output(s) 8 x XLR; electronically balanced analogue output(s)
  • Input gain control (sensitivity) +2 to 12 dB
  • Output level control (1 m output level based on 0 dBu input level) 100; 114 dB SPL
  • Controller design Analogue, active
  • Crossover frequency 80 Hz
  • Crossover slope 24 dB/oct; 4th order
  • Equalization: Low cut-off frequency 30 Hz; 0 to -12 dB
  • Equalization: Parametric EQ: Gain +4 to -12 dB
  • Equalization: Parametric EQ: Frequency bypass; 20 to 120 Hz
  • Equalization : Parametric EQ : Q 1 to 8
  • Phase 0; 45; 90; 90; 135 and 0/180 deg.
  • Peak protection circuit and thermal limiters
  • Infrasonic filter: frequency; slope 6.5 Hz; 12 dB/oct.
  • RJ45 connector for remote control: Via NRC1 remote control (optional): volume for all channels; bass management on/off; LFE gain 0/10 dB Via RS-232: more remotely controllable parameters.
  • Dimensions H x W x D 360 x 330 x 645 mm
  • Net internal/external volume 41.5 l/76.6 l
  • Weight 26.5 kg (58.4 lbs)
  • Magnetically shielded transducer 1 x 265 mm (1 x 10")
  • Cabinet surface; painted wood (MDF) colour, anthracite (RAL 7021)
  • Transducer protection metal grille
Four-mode LFE channel processing ensures compatibility across all formats and industries. Flexible switching and acoustic controls allow seamless system integration. Integrated volume control and hardware remote control allow centralised control of the system regardless of source, and electronics can be remotely located to reduce cabling.
Neumann - KH 810
Neumann - KH 810
2 082,50 € excl VAT
including eco-part : 0,90 €
Guarantee 3  years
Anais
Anais
Tristan
Tristan
Do you need help?

Spotlight on

A legendary brand for decades, present in all the major recording studios, Neumann is a guarantee of high quality and professionalism. The Beatles, Natalie Cole, Celine Dion, Bryan Adams and Beyoncé... all use this exceptional brand with the famous U87, and the TLM49 at the top of the list. In home studio, the TLM103 and TLM102 condenser microphones are the most popular. For studio sound on stage opt for the KMS105. In recent years, Neumann has also offered the high-end KH80, KH120 and KH310 monitors.

Find out more

Equivalent products

Tops of the brand