SE Electronics - DynaCaster DCM6
New
Lowest price over 30 days
149,17 €
99,17 €
excl VAT
-33%
In Stock
Usually ships within 5 days
+infos
Guarantee 2
years
Anais
Tristan
Do you need help?
Dynamic Microphone
The SE Electronics DynaCaster DCM6 is a front-address cardioid dynamic microphone with +30 dB active gain, suitable for voice, podcasting and streaming.
ARTICLE N° 121272
Presentation
The SE Electronics DynaCaster DCM6 builds on the DCM3 by adding an integrated active stage. This dynamic, front-address microphone is designed for vocal applications such as podcasting, streaming or recording, with simplified gain management.
The cardioid capsule focuses the pick-up on the voice while limiting ambient noise. The frequency response, from 40 Hz to 18 kHz, is ideal for speech and singing, with balanced reproduction of the different zones of the spectrum.
The special feature of the DCM6 is the integration of DYNAMITE technology, which allows up to +30 dB of gain to be added directly to the microphone. This function is activated via the +48V phantom power supply and allows a higher output level to be obtained without the need for an external line preamp.
The microphone also incorporates a pop filter and an internal capsule suspension system, which limits plosives and handling noise. This design allows the microphone to work without additional accessories, simplifying installation and positioning.
Its front-mount format and swivel bracket make it easy to integrate on different microphone arms. The DCM6 is connected via a standard XLR output and can be easily integrated into an existing audio chain.
The cardioid capsule focuses the pick-up on the voice while limiting ambient noise. The frequency response, from 40 Hz to 18 kHz, is ideal for speech and singing, with balanced reproduction of the different zones of the spectrum.
The special feature of the DCM6 is the integration of DYNAMITE technology, which allows up to +30 dB of gain to be added directly to the microphone. This function is activated via the +48V phantom power supply and allows a higher output level to be obtained without the need for an external line preamp.
The microphone also incorporates a pop filter and an internal capsule suspension system, which limits plosives and handling noise. This design allows the microphone to work without additional accessories, simplifying installation and positioning.
Its front-mount format and swivel bracket make it easy to integrate on different microphone arms. The DCM6 is connected via a standard XLR output and can be easily integrated into an existing audio chain.
Features
Capsule type
Dynamic
Application
Video / broadcast, Streaming, Speaking voice, Singing
Directivity
Cardioid
Weight
520 g
Power supply
Via +48 V phantom power supply
Frequency response, low limit
40 Hz
Frequency response, upper limit
18 kHz
Packaging
Single unit
Accessories included
5/8"⭢3/8" threaded adapter
Connectors
XLR male 3 pins
Color
Black
Other features
-
SE Electronics DynaCaster DCM6
-
Active dynamic microphone
-
Capsule type: dynamic
-
Directivity: cardioid
-
Frequency response: 40 Hz - 18 kHz
-
Sensitivity: 2.5 mV/Pa (-52 dBV) / 79 mV/Pa (-22 dBV with active gain)
-
Integrated gain: +30 dB (DYNAMITE technology)
-
Impedance: 600 / 135 Ohms
-
Recommended load impedance: >1 kOhms
-
Magnet: neodymium
-
Coil: copper
-
Connector : XLR 3-pin male
-
Type : front address
-
Pop filter : integrated
-
System : internal capsule suspension
-
Power supply: +48V Phantom
-
Current consumption: 3.1 mA
-
Applications : voice, podcast, streaming, broadcast, instruments
-
Dimensions: 158 x 86 x 62 mm
-
Weight: 518 g
-
Supplied accessories: Thread adaptor, SE Electronics sticker, User manual
