FILTER
FILTER
DPA - 6388-DP-A-C03-LH Brown LEMO
New
860 €
excl VAT
In Stock
Usually ships within 5 days
+infos
Guarantee 3
years
The DPA 6388 CORE+ is a directional headband microphone designed to keep the voice clear when the acoustic environment becomes noisy, with a discreet design and a comfortable fit. Its supercardioid capsule prioritises intelligibility and effective isolation of the voice, with a design engineered to maintain consistent performance even when the position varies slightly, without turning every spoken word into a balancing act. This brown version features a 3-pin LEMO connector and an Act headband that can be worn on either the left or right side, combining visual discretion, a secure fit and adaptability to the demands of the stage, live performance or public speaking.
ARTICLE N° 126690
Presentation
The 6388 is a directional headband microphone designed for clear speech pickup in acoustically complex environments. Its supercardioid polar pattern limits sensitivity to sounds coming from the sides and rear, resulting in a better-isolated voice.
Its acoustic design is based on an off-axis capsule, where the maximum sensitivity does not exactly follow the physical axis of the boom arm. This design ensures consistent pickup even when the capsule is positioned slightly to the side of the mouth, with less reliance on precise positioning.
The frequency response ranges from 100 Hz to 18 kHz, with a slight 1 dB boost at 14 kHz. This range promotes detailed speech reproduction, with a balance suited to close-mouthed use and controlled management of the proximity effect.
The Act armature builds on the familiar design of the 4066 and 4088 models, with improvements aimed at enhancing comfort and reliability. The rounded behind-the-ear earpieces reduce pressure points, the clips hold the selected setting more effectively, and routing the cable downwards minimises stress at the connection point.
CORE+ technology also aims to ensure consistent acoustic performance when pickup conditions vary. Directivity remains controlled across the entire spectrum, particularly at high frequencies, with predictable off-axis rejection and a high feedback-free gain. IP58 certification provides protection against moisture and dust, whilst the serviceable design promotes long-term use.
Its acoustic design is based on an off-axis capsule, where the maximum sensitivity does not exactly follow the physical axis of the boom arm. This design ensures consistent pickup even when the capsule is positioned slightly to the side of the mouth, with less reliance on precise positioning.
The frequency response ranges from 100 Hz to 18 kHz, with a slight 1 dB boost at 14 kHz. This range promotes detailed speech reproduction, with a balance suited to close-mouthed use and controlled management of the proximity effect.
The Act armature builds on the familiar design of the 4066 and 4088 models, with improvements aimed at enhancing comfort and reliability. The rounded behind-the-ear earpieces reduce pressure points, the clips hold the selected setting more effectively, and routing the cable downwards minimises stress at the connection point.
CORE+ technology also aims to ensure consistent acoustic performance when pickup conditions vary. Directivity remains controlled across the entire spectrum, particularly at high frequencies, with predictable off-axis rejection and a high feedback-free gain. IP58 certification provides protection against moisture and dust, whilst the serviceable design promotes long-term use.
Other features
-
DPA 6388 CORE+ Brown LEMO
-
Headband microphone
-
Series: Core+
-
Manufacturer’s part number: 6388-DP-A-C03-LH
-
Design: asymmetrical capsule, offset acoustic axis
-
Headband: optimised version of the Act Headset headband
-
Boom position: left or right
-
Proximity effect: highly controlled
-
Off-axis rejection: linear and predictable
-
Protection rating: IP58
-
Colour: Brown
-
Connectors: 3-pin LEMO
-
Polar pattern: supercardioid
-
Capsule: ∅5.1 mm, pre-polarised condenser
-
Operating principle: pressure gradient
-
Frequency response: 20 Hz ⭢ 20 kHz
-
Useful frequency range: 100 Hz ⭢ 18 kHz, ±2 dB
-
Boost: +1 dB @ 14 kHz
-
Sensitivity: 8.0 mV/Pa; -42 dB re. 1 V/Pa
-
Equivalent noise level: 26 dB(A), max. 28 dB(A)
-
ITU-R BS.468-4 noise level: 37 dB, max. 39 dB
-
THD < 0.5 per cent: 138 dB SPL RMS, 141 dB SPL peak
-
THD < 1 per cent: 140 dB SPL RMS, 143 dB SPL peak
-
Dynamic range: 117 dB
-
Maximum SPL at 10 per cent THD: 144 dB SPL peak
-
Output impedance: 60 ⭢ 80 Ω with MicroLock
-
Output impedance: 100 Ω with DAD9099 or DAD9001
-
Power supply: 5 ⭢ 10 V via DPA adapter
-
Power supply with DAD9001: P48
-
Maximum performance from 14 V
-
Cable diameter: ∅1.6 mm
-
Cable length: 1.3 m
-
Supplied with 2 windscreen covers + make-up shield
-
Supplied in a case
-
Weight: 15 g
To find out more...
For on-stage presentations where the speakers are positioned close to the speaker’s position, the 6388 can be used to ensure the voice remains intelligible whilst providing better control over sound from the sides and rear. Its supercardioid polar pattern is also suitable for situations where the audience and sound system create complex acoustics.
For a show or conference requiring multiple set-ups, the various versions of the 6388 allow the solution to be tailored to the context: available in beige, brown or black, in Standard or Small sizes, and with MicroLock, TA4F Mini-XLR, 3-pin or mini-jack connectors. The version shown here is brown, standard size and features a 3-pin LEMO connector.
For a show or conference requiring multiple set-ups, the various versions of the 6388 allow the solution to be tailored to the context: available in beige, brown or black, in Standard or Small sizes, and with MicroLock, TA4F Mini-XLR, 3-pin or mini-jack connectors. The version shown here is brown, standard size and features a 3-pin LEMO connector.
You may also like
Spotlight on
Equivalent products
Tops of the brand
DPA - 6388-DP-A-C03-LH Brown LEMO
860 € excl VAT