FILTER
FILTER
DPA - 6388-DP-A-F03-LH Beige LEMO
New
849,17 €
excl VAT
In Stock
Usually ships within 5 days
+infos
Guarantee 3
years
The DPA 6388 CORE+ head-worn microphone combines precise supercardioid pickup with natural vocal reproduction, and is designed to maintain good stability when the acoustic environment becomes challenging, particularly in the presence of reflections and nearby sound sources. Its discreet, adjustable design ensures a comfortable fit, with a headband that can be positioned on the left or right, a non-reflective beige finish and a 3-pin LEMO connector that integrates easily into compatible set-ups, without turning daily set-up into a nightmare.
ARTICLE N° 126698
Presentation
This directional headband microphone is suitable for situations where the voice must remain clear despite a noisy background, such as on stage, at conferences, in the theatre or for amplified sound in auditoriums. Its supercardioid polar pattern limits pickup from the sides and rear, ensuring better separation of speech from competing sound sources and reducing the risk of feedback, whilst delivering a clearer vocal image.
Its CORE+ capsule maintains a consistent response across a wide part of the spectrum, with a usable range from 100 Hz to 18 kHz and a slight boost of 1 dB at 14 kHz. This control helps to maintain clear and natural vocal reproduction, with a stable tonal balance across the entire usable frequency range and controlled presence.
The system’s acoustic design reduces sensitivity to variations in placement, thanks in particular to a carefully off-centre acoustic axis and a partially asymmetrical capsule, designed to stabilise the pickup. Pickup performance remains effective when the boom is positioned slightly to the side of the mouth, with a more controlled response to minor positional variations and greater consistency across different set-ups.
The 6388’s Act armature retains the general architecture already familiar from the 4066 and 4088 models, with several targeted adjustments aimed at comfort, reliability, visual discretion and ease of adjustment. The rounded ear tips reduce pressure points, the reinforced clips stabilise the fit, and the downward cable routing minimises stress at the junction between the ear hook and the cable, ensuring a more comfortable fit for everyday wear.
Its CORE+ capsule maintains a consistent response across a wide part of the spectrum, with a usable range from 100 Hz to 18 kHz and a slight boost of 1 dB at 14 kHz. This control helps to maintain clear and natural vocal reproduction, with a stable tonal balance across the entire usable frequency range and controlled presence.
The system’s acoustic design reduces sensitivity to variations in placement, thanks in particular to a carefully off-centre acoustic axis and a partially asymmetrical capsule, designed to stabilise the pickup. Pickup performance remains effective when the boom is positioned slightly to the side of the mouth, with a more controlled response to minor positional variations and greater consistency across different set-ups.
The 6388’s Act armature retains the general architecture already familiar from the 4066 and 4088 models, with several targeted adjustments aimed at comfort, reliability, visual discretion and ease of adjustment. The rounded ear tips reduce pressure points, the reinforced clips stabilise the fit, and the downward cable routing minimises stress at the junction between the ear hook and the cable, ensuring a more comfortable fit for everyday wear.
Other features
-
DPA 6388 CORE+ Beige LEMO
-
Headband microphone
-
Series: Core+
-
Manufacturer’s part number: 6388-DP-A-F03-LH
-
Design: asymmetrical capsule, offset acoustic axis
-
Headband: optimised version of the Act Headset headband
-
Boom position: left or right
-
Proximity effect: highly controlled
-
Off-axis rejection: linear and predictable
-
Protection rating: IP58
-
Colour: Beige
-
Connectivity: 3-pin LEMO
-
Polar pattern: supercardioid
-
Capsule: ∅5.1 mm, pre-polarised condenser
-
Operating principle: pressure gradient
-
Frequency response: 20 Hz ⭢ 20 kHz
-
Useful frequency range: 100 Hz ⭢ 18 kHz, ±2 dB
-
Boost: +1 dB @ 14 kHz
-
Sensitivity: 8.0 mV/Pa; -42 dB re. 1 V/Pa
-
Equivalent noise level: 26 dB(A), max. 28 dB(A)
-
ITU-R BS.468-4 noise level: 37 dB, max. 39 dB
-
THD < 0.5 per cent: 138 dB SPL RMS, 141 dB SPL peak
-
THD < 1 per cent: 140 dB SPL RMS, 143 dB SPL peak
-
Dynamic range: 117 dB
-
Maximum SPL at 10 per cent THD: 144 dB SPL peak
-
Output impedance: 60 ⭢ 80 Ω with MicroLock
-
Output impedance: 100 Ω with DAD9099 or DAD9001
-
Power supply: 5 ⭢ 10 V via DPA adapter
-
Power supply with DAD9001: P48
-
Maximum performance from 14 V
-
Cable diameter: ∅1.6 mm
-
Cable length: 1.3 m
-
Supplied with 2 windscreens + make-up shield
-
Supplied in a case
-
Weight: 15 g
To find out more...
For applications requiring rapid identification of the equipment, the 24 variants in the 6388 range cover 3 colours, 2 sizes and 4 connector types, including this 3-pin LEMO version, to make selection easier depending on the available configuration.
The case features a transparent window allowing you to quickly identify the connector, the capsule and the colour, whilst its elastic strap makes it easy to put the microphone back in place. It also features a side pocket that protects the identification label from wear and tear and simplifies storage between uses, with a design intended to minimise unnecessary handling in day-to-day use.
The case features a transparent window allowing you to quickly identify the connector, the capsule and the colour, whilst its elastic strap makes it easy to put the microphone back in place. It also features a side pocket that protects the identification label from wear and tear and simplifies storage between uses, with a design intended to minimise unnecessary handling in day-to-day use.
You may also like
Spotlight on
Equivalent products
Tops of the brand
DPA - 6388-DP-A-F03-LH Beige LEMO
849,17 € excl VAT