EMG - JH "HET" Set Brushed Chrome
187,50 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Guitar Microphone
EMG revisits the metal recipe with the JH "HET" Set Brushed Chrome pickups. Ceramic for precision, steel for sharpness. The Metal Works finish is impressive for its looks, but it's the punch of the audio that really shines through. This model is James Hetfield's setup, delivered turnkey.
ARTICLE N° 107791
Presentation
The EMG JH "HET" Set Brushed Chrome pickups embody the spirit of Metallica in a wired version. Each active pickup pushes in a clear direction. Neck: rounder, richer. Bridge: clean, compressed, sharp.
The chrome finish is not just cosmetic. It protects the metal stage shells without sacrificing style. The Metal Works look says it all without saying a word. Do you want precise crunch or big, controlled gain? This duo always reacts as expected, without any hiss or unnecessary feedback.
Ironless mounting, IDC cables, battery bus, stereo jack... it's all included. EMG connectors let you switch easily to other modules. You can expand your setup without taking it all apart. The whole set keeps fishing for 1500 hours of autonomy and draws only 160 microamps at 9V. You almost forget they're active.
Designed to take in and send out, this model really has everything to seduce you. And all with good accuracy.
The chrome finish is not just cosmetic. It protects the metal stage shells without sacrificing style. The Metal Works look says it all without saying a word. Do you want precise crunch or big, controlled gain? This duo always reacts as expected, without any hiss or unnecessary feedback.
Ironless mounting, IDC cables, battery bus, stereo jack... it's all included. EMG connectors let you switch easily to other modules. You can expand your setup without taking it all apart. The whole set keeps fishing for 1500 hours of autonomy and draws only 160 microamps at 9V. You almost forget they're active.
Designed to take in and send out, this model really has everything to seduce you. And all with good accuracy.
Other features
-
EMG JH "HET" Set Brushed Chrome
-
Guitar pickups set
-
Metal Works Series - EMG JH Set (James Hetfield Signature)
-
Colour: Brushed Chrome
-
Magnets : Ceramic (neck), Ceramic/Steel (bridge)
-
Resonance frequency: 2.11 kHz (neck), 1.61 kHz (bridge)
-
Output voltage: 3.00 V (string), 4.50 V (sweep)
-
Output noise (60 Hz) : -100 dB
-
Output impedance : 10 kΩ
-
Current @ 9V : 160 µA (complete set)
-
Battery life: 1500 hours
-
Max supply voltage: 27 V DC
-
Solderless installation system included
-
Standard spacing (Tune-O-Matic) 49mm
-
Potentiometer short shaft (Strat) 10 mm
-
Potentiometers: 2 x 25k volume, 2 x 25k tone
-
Cables included: 2 microphone cables, 4 connection cables, 1 output cable, 1 battery cable
-
Accessories: 1 battery bus, 1 stereo jack, 1 microphone input/output bus
-
Hardware: 2 pairs of screws and springs supplied
-
No grounding required on strings
-
Compatible with EMG accessories (VLPF, EXG, SPC, RPC)
-
Cables: 2 microphone cables 38 cm, output 15 cm, 3 connection cables 14 cm, battery 18 cm
-
Microphone body: Metal Works finish (stainless steel)
-
Mic type: James Hetfield signature active humbucker
-
Recommended installation with SwitchCraft 152B stereo jack (long panel) if required
-
Detailed wiring and mounting instructions included
-
Pickup dimensions: L 69.8 mm x H 22.8 mm x W 18.4 mm
-
Mounting screw spacing: 78.5 mm
To find out more...
The complete cable kit for the EMG JH "HET" Set Brushed Chrome includes everything you need for careful installation. Each cable corresponds to a precise need, so there's no need to forget. The fact that you don't have to ground the cords simplifies installation and reduces interference.
The metal screws and springs supplied hold the pickups to the stainless steel Metal Works finish body. This ensures that the pickup remains firmly in place, even when playing intensely. The SwitchCraft stereo jack makes it easy to route and change configurations without cutting out. It optimises signal management, giving the user more possibilities.
The metal screws and springs supplied hold the pickups to the stainless steel Metal Works finish body. This ensures that the pickup remains firmly in place, even when playing intensely. The SwitchCraft stereo jack makes it easy to route and change configurations without cutting out. It optimises signal management, giving the user more possibilities.
