Guitar Microphone

The EMG 57/66 TW Axe Long Chrome pickup set features two dual-mode active pickups. The 57TW bridge pickup combines Alnico and steel. The 66TW neck combines Alnico and ceramic. The integrated push-pull switches between single and double windings. Assembly is seamless, and the long axle is compatible with Les Paul guitars.

ARTICLE N° 107928
The 57/66 TW Axe Long Chrome pickups take the idea of the active pickup one step further. Each model has a precise single-coil mode and a more muscular double-coil mode. Switching is a breeze, thanks to the push-pulls supplied.

On the bridge side, the 57TW combines steel and Alnico. Its grain cuts through the mix, while retaining a round attack. The 66TW, on the neck, uses a combination of Alnico and ceramic. It delivers a broad, full and responsive signal.

All the wiring is included. No need for a soldering iron, everything goes through connectors. The stereo jack, 25K pots and bus system make installation easy. The microphone remains compatible with all EMG active references.

This set is designed for guitars with screwed or glued necks, with a bridge spaced at 52 mm. The 19 mm axis corresponds to models with a domed top. The 9V battery lasts for months. The tone remains clean, even at high levels.
  • EMG 57/66 TW Set Long Axle Chrome
  • EMG TW Series
  • Dual mode pickups: humbucker and single coil
  • Potentiometer axis length: (Les Paul) 19 mm
  • Integrated Push-Pull selection system
  • 57TW (bridge): alnico + steel magnets
  • Clear, powerful sound with single coil
  • Warm, aggressive sound in double winding
  • 66TW (neck): ceramic + alnico magnets
  • Fluid, precise and expressive timbre
  • Exclusive EMG three-coil hybrid design
  • Compatible with all EMG pickups
  • Solderless installation via included connectors
  • 25K potentiometers for active pickups
  • Trem spacing (Floyd/Fender) 52 mm
  • Long shaft potentiometer (Les Paul) 19 mm
  • No bridge ground required
  • Requires one 9V battery (not included)
  • Battery life: approx. 1500 hours
  • High output level and very low noise
  • Resonance frequency: 3.47 kHz (single)
  • Resonance frequency: 1.77 kHz (double)
  • Output impedance: 10 kΩ
  • Max. supply voltage: 27V DC
  • Current consumption: 160 μA
  • Output voltage (string): 2.00V (single)
  • Output voltage (string): 3.00V (double)
  • Output voltage (strumming): 3.00V (single)
  • Output voltage (strumming): 4.50V (double)
  • Logo colour: copper (not visible on Metalworks)
  • 2 TW microphone cables (40.6 cm and 27.9 cm)
  • 4 connection cables (14 cm)
  • 1 output cable (15 cm)
  • 1 battery cable (18 cm)
  • 2 push-pull potentiometers (25K)
  • 2 25K tones
  • 1 stereo output jack
  • 1 input/output bus for 2 microphones
  • 1 battery bus
  • 2 pairs of fixing screws and springs
  • Mic dimensions: 78.5 x 38.1 x 27.6 mm
  • Thickness: 1.1" (27.9 mm)
  • Weight (each microphone): approx. 120 g
The EMG 57/66 TW Axe Long Chrome pickup set sends out a powerful signal. This high voltage demands robust preamps that are ready to take it without flinching.

The neck pickup blends ceramic and alnico, giving chords a vibrant richness and razor-sharp precision. Solderless installation revolutionises sessions, making swaps ultra-fast.

In the studio or on stage, you gain a real advantage. The 66TW split surprises with its lively dynamics. It reveals unprecedented textures that electrify the listener. It's a real game-changer.
EMG - 57/66 TW Set Long Shaft Chrome
EMG - 57/66 TW Set Long Shaft Chrome
233,33 € excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3  years
Fred
Fred
Eric
Eric
Do you need help?

Spotlight on