Novastar
Satisfied or your money back for up to 45 days
Guarantee 3 years
CVT 320 Novastar
CVT 320 Novastar

Novastar - CVT 320

New
204,17 € excl VAT
In Stock
Usually ships within 4 days
+infos
Guarantee 3  years
REFERENCE : NOVCVT320
Louis
Louis
Do you need help?
Streaming equipment

The NovaStar CVT320 is a converter that enables the connection between a video processor and an LED screen to be extended when direct network cabling is no longer sufficient to cover the required distance. Used in pairs – with one unit acting as a transmitter (TX) and the other as a receiver (RX) – it converts the RJ45 connection into a single-mode fibre-optic transmission over distances of up to 15 km. Its plug-and-play operation requires no additional drivers, and its LC connector makes it easy to connect the optical modules.

ARTICLE N° 127821
Novastar - CVT 320 Novastar - CVT 320
New
204,17 € excl VAT
In Stock
Usually ships within 4 days
+infos
Guarantee 3  years
REFERENCE : NOVCVT320
Louis
Louis
Do you need help?
Other features
|Presentation
In an LED installation, the distance between the processor and the screen can quickly become a key factor in choosing the transmission architecture. The NovaStar CVT320 converter provides a direct solution to this challenge by enabling data to be transmitted over single-mode fibre optic cable over a distance of up to 15 km.

The system comprises two complementary units. One CVT320 is positioned on the processor side and acts as the TX transmitter, whilst a second unit is located near the LED screen as the RX receiver. Data from the RJ45 output of a transmission card is thus transmitted over the fibre link before being received at the other end to feed the display system.

The CVT320 supports an SFP module with an LC connector and operates with single-mode fibre. This architecture makes it possible, in particular, to locate the control room, the NovaStar processor or the screen control area further away without having to install the video processing equipment in the immediate vicinity of the panels. It can also simplify deployment when equipment is spread across different areas within the same site.

It remains particularly simple to use: the converter is plug-and-play and requires no specific drivers to be installed. Port mapping can be managed via the NovaStar system software, whilst the device merely handles the conversion required to transmit the signal.
Digital input
 RJ45
Weight
 700 g
Power supply
 220 V
Packaging
 Single unit

Other features

  • NovaStar CVT320
  • Fibre-optic converter for LED systems
  • Function: Long-distance transmission between processor and LED screen
  • Control system: NovaStar
  • Operating mode: Transmitter (TX) or receiver (RX)
  • Recommended configuration: 2 units, one TX and one RX
  • Maximum transmission distance: Up to 15 km
  • Fibre mode: Single-mode
  • Fibre connector: LC
  • SFP module: Included
  • Data input: RJ45
  • Port mapping: Software-managed
  • Plug and play
  • Optical output: Yes, via SFP module
  • Power supply: 100–240 V AC, 50/60 Hz
  • Power consumption: 16 W
  • Power connector: IEC
  • Cooling: Passive
  • Housing material: Aluminium
  • Protection rating: IP20
  • Colour: Black
  • Dimensions: 149 × 38 × 132 mm
  • Weight: 700 g

Spotlight on

Find out more

Equivalent products

Tops of the brand

Novastar - CVT 320
204,17 € excl VAT