Rme - Pack Babyface Pro FS + Enceinte Rokit RP5 G5 (la paire)
870,83 €
excl VAT
including eco-part : 1,80 €
In Stock
Shippable immediately
+infos
Guarantee 3
years
Anais
Tristan
Do you need help?
Audio Interfaces
This pack combines the RME Babyface Pro FS audio interface and a pair of KRK RP5 G5 speakers, perfect for setting up a pro home studio without breaking the bank! Babyface handles 12 inputs/outputs with clean preamps, a high-resolution converter and ultra-low latency. The KRK RP5 G5, with its silk tweeters and Kevlar woofers, delivers precise sound.
ARTICLE N° 110162
Composition of the package
Presentation
The RME Babyface Pro FS + KRK Classic 5 G3 pack brings together a high-end audio interface and 2 reliable monitoring speakers for your home studio projects! Babyface Pro FS retains the compact format of the series while incorporating improved conversion and increased precision.
Powered by USB, the interface is easy to install on a desk and requires no external power supply. The mic preamps are remarkably clear, with low noise and plenty of gain reserve.
The converters provide detailed reproduction for both mixing and recording. Two independent headphone outputs allow you to switch between monitoring and listening without having to reconnect anything.
The KRK Classic 5 G3 speakers deliver clean, direct sound. Thanks to the gain control at the rear, you can adjust the level to suit your space.
Whether you're working on podcasts, beatmaking or stereo mixes, the whole set-up allows you to mix or edit with a stable, consistent sound. In just a few minutes, the system is up and running on Mac or PC.
Powered by USB, the interface is easy to install on a desk and requires no external power supply. The mic preamps are remarkably clear, with low noise and plenty of gain reserve.
The converters provide detailed reproduction for both mixing and recording. Two independent headphone outputs allow you to switch between monitoring and listening without having to reconnect anything.
The KRK Classic 5 G3 speakers deliver clean, direct sound. Thanks to the gain control at the rear, you can adjust the level to suit your space.
Whether you're working on podcasts, beatmaking or stereo mixes, the whole set-up allows you to mix or edit with a stable, consistent sound. In just a few minutes, the system is up and running on Mac or PC.
Other features
-
Audio Interface + Speakers Pack, including :
-
RME Babyface Pro FS
-
USB 2.0 audio interface
-
Mac and PC compatible
-
12 input channels and 12 output channels
-
4 x analogue inputs (mic, line, instrument)
-
4 x analogue outputs (2 x XLR, 2 x headphones)
-
1 ADAT or optical SPDIF input/output
-
1 MIDI input/output
-
1 USB 2.0 port (USB 3 compatible)
-
Digital gain control on all inputs
-
High or low impedance headphone outputs (6.35 mm jack and mini-jack)
-
Ideal for : Recording studio, Live performance / DJ, Producers, Room calibration, Mobile solution
-
Technical specifications :
-
AD, Microphone/Line 1-2
-
Input: XLR, electronically balanced
-
Frequency response :
-
44.1 kHz, -0.1 dB: 18 Hz - 20.8 kHz
-
96 kHz, -0.5 dB: 7 Hz - 45.8 kHz
-
192 kHz, -1 dB : 5 Hz - 88 kHz
-
Maximum input level XLR :
-
Gain 0 dB : +8 dBu, PAD+19 dBu
-
Gain 65 dB : -57 dBu, PAD-46 dBu
-
Input: 6.3 mm TS jack, unbalanced
-
Frequency response :
-
44.1 kHz, -0.1 dB : 5 Hz - 20.8 kHz
-
96 kHz, -0.5 dB :
-
192 kHz, -1 dB :
-
Maximum input level
-
+4 dBu, Gain 0 dB : +13 dBu
-
10 dBV, Gain 9 dB : -5 dBu
-
DA, Line Out 1-2
-
Frequency response :
-
44.1 kHz, -0.5 dB : 0 Hz - 20.8 kHz
-
96 kHz, -0.5 dB : 0 Hz - 45 kHz
-
192 kHz, -1 dB : 0 Hz - 89 kHz
-
Output: XLR balanced
-
Output impedance: 300 Ohm balanced, 150 Ohm unbalanced
-
Output level at 0 dBFS: balanced +19 / +4 dBu, unbalanced +13 / +7 dBu
-
DC @ 0 dBFS : 6.35 mm 4.8 V, 3.5 mm 2.4 V, XLR bal. 9.6 V
-
DA, 3/4" PHONES
-
AS DA Line Out :
-
Output: 6.3 mm TRS jack, unbalanced
-
Output impedance: 10 Ohm
-
Output level at 0 dBFS, 1 kOhm load: +13 dBu
-
Maximum power @ 0.1 THD: 60 mW
-
Signal-to-noise ratio (SNR): 114.8 dB RMS unweighted, 118 dBA
-
Noise level: -101.8 dBu
-
Output: 3.5 mm TRS jack, unbalanced
-
Output impedance: 0.1 Ohm
-
Output level at 0 dBFS, 1 kOhm load: +7 dBu
-
Maximum power @ 0.1 THD: 90 mW
-
Signal-to-noise ratio (SNR) : 114 dB RMS unweighted, 117 dBA
-
Noise level: -107 dBu
-
MIDI :
-
1 x MIDI I/O via connection cable with 2 x 5-pin DIN connectors
-
High-speed mode: Icing and response times typically less than 1 ms
-
DIGITAL :
-
Clocks: Internal, ADAT In, SPDIF In
-
External clock jitter suppression: > 50 dB (2.4 kHz)
-
Sampling frequencies supported: 28 kHz to 200 kHz
-
Digital input
-
ADAT Optical
-
1 x TOSLINK
-
Standard: 8 channels, 24 bit, up to 48 kHz
-
Double speed (S/MUX): 4 channels 24-bit 96 kHz
-
Quad speed (S/MUX4): 2 channels 24-bit 192 kHz
-
Locking range: 31.5 kHz - 50 kHz
-
Jitter suppression: > 50 dB (2.4 kHz)
-
SPDIF optical
-
1 x optical, to IEC 60958
-
Accepts : Consumer and professional format
-
Locking range: 27 kHz - 200 kHz
-
Jitter suppression: > 50 dB (2.4 kHz)
-
Digital outputs
-
Optical ADAT
-
1 x TOSLINK
-
Standard: 8 channels 24 bit, up to 48 kHz
-
Double speed (S/MUX): 4 channels 24-bit 96 kHz
-
Quadruple speed (S/MUX4): 2 channels 24-bit 192 kHz
-
SPDIF optical sampling frequency: 28 kHz to 200 kHz
-
General :
-
Power supply: USB bus or external power supply
-
Idle power consumption: 2.8 Watts
-
Typical power consumption: 3.7 Watts
-
Max power consumption: 5.4 Watts
-
Dimensions (WxHxD): 108 x 35 x 181 mm
-
Weight: 680 g
-
+
-
KRK Rokit RP5 G5 (pair)
-
Active studio monitor
-
Made in the USA
-
Configuration: 2-way bass reflex
-
Speakers: 5" (127 mm), aramid / woven Kevlar cone
-
Tweeter: 1" (25 mm), silk dome, copper cap, ferrite magnet
-
Crossover: 2.27kHz
-
Frequency response: 43Hz ⭢ 40KHz
-
Bi-Amplifier: Class D 55 watts
-
HF amplifier: 20 watts
-
LF amplifier: 35 watts
-
Total dynamic power: 130 watts
-
Maximum SPL: 104 dB
-
Dispersion: H155° x V126
-
Connectors: Combo XLR/TRS jack Ø6.35mm Balanced
-
Input impedance : 5,12 kΩ Balanced
-
Signal-to-noise ratio : 101.5 dB (Low Sensitivity setting, balanced), 94 dB (High Sensitivity, unbalanced)
-
Integrated limiter
-
Material: vinyl-wrapped MDF
-
Integrated DSP-controlled LCD visual equaliser
-
25 graphic equalisations for different environments
-
Settings :
-
Volume
-
EQ Parameters: LF and HF adjust
-
LCD Display: Brightness, Contrast, Standby, Logo, Factory Reset
-
KRK app with room-correction module
-
Dimensions: 288 x 242 x 191 mm
-
Weight : 4,95 Kg
To find out more...
The original RME Babyface audio interface was a huge success when it was released. That's why RME knew that in order to raise the bar, it needed a complete overhaul. Babyface Pro 12 inputs and 12 outputs is the result of their work. The Pro is designed to give you the quality of the original, but with great control right on its front plate, a robust and attractive aluminium housing, and virtually no need for breakout cables. The RME Babyface Pro makes it easier than ever to create the tracks you need.
Videos
You may also like
Spotlight on
Since 1996, RME has been providing high-quality equipment for computer-based music recording (CBR): Converters, USB, FireWire and/or Thunderbolt audio interfaces with built-in DSP, which together with TotalMix FX offer numerous mixing, effects and even remote control features. The majority of RME's products are Mac, PC and iOS compatible, giving you the freedom to record and produce, wherever the music takes you. Whether it's for the stage or studio, you can count on your RME audio equipment to deliver the quality and reliability you expect.
