Rme - Pack Babyface Pro FS + Enceinte Classic 5 G3 (la paire)
This product is no longer available for sale
These models in stock may be of interest to you:
861,67 €
excl VAT
including eco-part : 0,90 €
Guarantee 3
years
Anais
Tristan
Do you need help?
Audio Interfaces
This pack combines the RME Babyface Pro FS audio interface with a pair of KRK Classic 5 G3 speakers, perfect for setting up your pro home studio! The USB 2.0 audio interface handles 12 inputs/outputs, with 4 analogue inputs (mic, line, instrument) and high- and low-impedance headphone outputs. The 2-way active speakers deliver 50 W each, with a wide frequency response (46 Hz - 34.5 kHz) and precise treble and bass controls.
ARTICLE N° 110132
Presentation
The RME Babyface Pro FS interface boasts an impressive level of detail! Its ultra-precise conversion brings out the most subtle nuances in your instruments.
You can connect microphones, keyboards or guitars directly via its XLR/Jack combo inputs. The two independent headphone outputs allow custom monitoring during recording.
On stage or in the studio, its latency is virtually imperceptible. The front-panel gain controls are precise and easy to adjust. The integrated LED display gives a good overview of levels in real time.
With TotalMix FX, you can manage all your routings and internal effects without leaving your workflow. The interface works via USB without an external power supply, even for condenser mics.
The KRK Classic 5 G3 speakers provide a clear stereo image and well-defined bass. Their flat response means you can mix for long periods without tiring. The soft dome tweeter delivers accurate highs without aggression.
Each speaker has its own amplifier, for a responsive dynamic response. This duo forms a compact, precise workstation, ready to capture your ideas as soon as they arise!
You can connect microphones, keyboards or guitars directly via its XLR/Jack combo inputs. The two independent headphone outputs allow custom monitoring during recording.
On stage or in the studio, its latency is virtually imperceptible. The front-panel gain controls are precise and easy to adjust. The integrated LED display gives a good overview of levels in real time.
With TotalMix FX, you can manage all your routings and internal effects without leaving your workflow. The interface works via USB without an external power supply, even for condenser mics.
The KRK Classic 5 G3 speakers provide a clear stereo image and well-defined bass. Their flat response means you can mix for long periods without tiring. The soft dome tweeter delivers accurate highs without aggression.
Each speaker has its own amplifier, for a responsive dynamic response. This duo forms a compact, precise workstation, ready to capture your ideas as soon as they arise!
Other features
-
Audio Interface + Speakers Pack, including :
-
RME Babyface Pro FS
-
USB 2.0 audio interface
-
Mac and PC compatible
-
12 input channels and 12 output channels
-
4 x analogue inputs (mic, line, instrument)
-
4 x analogue outputs (2 x XLR, 2 x headphones)
-
1 ADAT or optical SPDIF input/output
-
1 MIDI input/output
-
1 USB 2.0 port (USB 3 compatible)
-
Digital gain control on all inputs
-
High or low impedance headphone outputs (6.35 mm jack and mini-jack)
-
Ideal for: Recording studio, Live performance / DJ, Producers, Room calibration, Mobile solution
-
Technical specifications :
-
AD, Microphone/Line 1-2
-
Input: XLR, electronically balanced
-
Frequency response :
-
44.1 kHz, -0.1 dB: 18 Hz - 20.8 kHz
-
96 kHz, -0.5 dB: 7 Hz - 45.8 kHz
-
192 kHz, -1 dB : 5 Hz - 88 kHz
-
Maximum input level XLR :
-
Gain 0 dB : +8 dBu, PAD+19 dBu
-
Gain 65 dB : -57 dBu, PAD-46 dBu
-
Input: 6.3 mm TS jack, unbalanced
-
Frequency response :
-
44.1 kHz, -0.1 dB : 5 Hz - 20.8 kHz
-
96 kHz, -0.5 dB :
-
192 kHz, -1 dB :
-
Maximum input level
-
+4 dBu, Gain 0 dB : +13 dBu
-
10 dBV, Gain 9 dB : -5 dBu
-
DA, Line Out 1-2
-
Frequency response:
-
44.1 kHz, -0.5 dB : 0 Hz - 20.8 kHz
-
96 kHz, -0.5 dB : 0 Hz - 45 kHz
-
192 kHz, -1 dB : 0 Hz - 89 kHz
-
Output: XLR balanced
-
Output impedance: 300 Ohm balanced, 150 Ohm unbalanced
-
Output level at 0 dBFS: balanced +19 / +4 dBu, unbalanced +13 / +7 dBu
-
DC @ 0 dBFS : 6.35 mm 4.8 V, 3.5 mm 2.4 V, XLR bal. 9.6 V
-
DA, 3/4" PHONES
-
AS DA Line Out :
-
Output: 6.3 mm TRS jack, unbalanced
-
Output impedance: 10 Ohm
-
Output level at 0 dBFS, 1 kOhm load: +13 dBu
-
Maximum power @ 0.1 THD: 60 mW
-
Signal-to-noise ratio (SNR): 114.8 dB RMS unweighted, 118 dBA
-
Noise level: -101.8 dBu
-
Output: 3.5 mm TRS jack, unbalanced
-
Output impedance: 0.1 Ohm
-
Output level at 0 dBFS, 1 kOhm load: +7 dBu
-
Maximum power @ 0.1 THD: 90 mW
-
Signal-to-noise ratio (SNR) : 114 dB RMS unweighted, 117 dBA
-
Noise level: -107 dBu
-
MIDI :
-
1 x MIDI I/O via connection cable with 2 x 5-pin DIN connectors
-
High-speed mode: Icing and response times typically less than 1 ms
-
DIGITAL :
-
Clocks: Internal, ADAT In, SPDIF In
-
External clock jitter suppression: > 50 dB (2.4 kHz)
-
Sampling frequencies supported: 28 kHz to 200 kHz
-
Digital input
-
ADAT Optical
-
1 x TOSLINK
-
Standard: 8 channels, 24 bit, up to 48 kHz
-
Double speed (S/MUX): 4 channels 24-bit 96 kHz
-
Quad speed (S/MUX4): 2 channels 24-bit 192 kHz
-
Locking range: 31.5 kHz - 50 kHz
-
Jitter suppression: > 50 dB (2.4 kHz)
-
Optical SPDIF
-
1 x optical, to IEC 60958
-
Accepts : Consumer and professional format
-
Locking range: 27 kHz - 200 kHz
-
Jitter suppression: > 50 dB (2.4 kHz)
-
Digital outputs
-
Optical ADAT
-
1 x TOSLINK
-
Standard: 8 channels 24 bit, up to 48 kHz
-
Double speed (S/MUX): 4 channels 24-bit 96 kHz
-
Quadruple speed (S/MUX4): 2 channels 24-bit 192 kHz
-
SPDIF optical sampling frequency: 28 kHz to 200 kHz
-
General:
-
Power supply: USB bus or external power supply
-
Idle power consumption: 2.8 Watts
-
Typical power consumption: 3.7 Watts
-
Max power consumption: 5.4 Watts
-
Dimensions (WxHxD): 108 x 35 x 181 mm
-
Weight: 680 g
-
+
-
KRK Classic 5 G3 (pair)
-
Active studio monitors
-
2-way speakers, Bass Reflex
-
Tweeter: ∅1" (25.4 mm) soft dome
-
Woofer: ∅5" (127 mm) aramid glass composite
-
Frequency response: 46 Hz ⭢ 34.5 kHz
-
Crossover: 2.6 kHz
-
Amplification : Class AB
-
Total power : 50 W
-
Max. level SPL : 101dB
-
Distortion: < 0.1
-
Directivity: H 133° x V 90
-
Signal-to-noise ratio : > 94 dB
-
Magnetically shielded
-
Controls :
-
System volume: -30 dB // +6 dB
-
LF level adjustment (< 200 Hz) : -1 dB, +1 dB, Flat, +2 dB
-
HF level adjustment (> 2.6 kHz) : -2 dB, -1 dB, Flat, +1 dB
-
Input connectors: RCA, TRS ∅6.35 mm jack, XLR
-
Material: 15 mm MDF
-
Power supply: 240 V AC (T500mAL, 250 V)
-
Supplied with:
-
Set of 2x XLR cables, 2.5m
-
Set of 2x insulating foams
-
Dimensions: 332 x 290 x 226 mm
-
Weight: 5.87 kg
To find out more...
The original RME Babyface audio interface was a huge success when it was released. That's why RME knew that in order to raise the bar, it needed a complete overhaul. Babyface Pro 12 inputs and 12 outputs is the result of their work. The Pro is designed to give you the quality of the original, but with great control right on its front plate, a robust and attractive aluminium housing, and virtually no need for breakout cables. The RME Babyface Pro makes it easier than ever to create the tracks you need.
Spotlight on
Since 1996, RME has been providing high-quality equipment for computer-based music recording (CBR): Converters, USB, FireWire and/or Thunderbolt audio interfaces with built-in DSP, which together with TotalMix FX offer numerous mixing, effects and even remote control features. The majority of RME's products are Mac, PC and iOS compatible, giving you the freedom to record and produce, wherever the music takes you. Whether it's for the stage or studio, you can count on your RME audio equipment to deliver the quality and reliability you expect.
