Rme - Pack Babyface Pro FS + Enceinte Rokit RP8 G5 (la paire)
1 041,67 €
excl VAT
including eco-part : 1,80 €
In Stock
Shippable immediately
+infos
Guarantee 3
years
Anais
Tristan
Do you need help?
Audio Interfaces
The audio interface + speakers pack combines the RME Babyface Pro FS interface and KRK Rokit RP8 G5 monitors. The interface handles 12 inputs/outputs with 4 mic/line preamps, a high-resolution converter and digital gain control for quality sound recording. The KRKs, with their Kevlar drivers and integrated DSP, deliver a flat response and an SPL of 111dB, ideal for mixing or producing in any environment!
ARTICLE N° 110168
Composition of the package
Presentation
The RME Babyface Pro FS + KRK Rokit RP8 G5 pack brings together a top-of-the-range audio interface and two powerful monitoring speakers. The Babyface has 2 XLR microphone inputs with transparent preamps. It also incorporates two line inputs and two independent headphone outputs. The milled aluminium casing remains compact without sacrificing quality.
The 24-bit/192kHz AD/DA conversion is based on the same circuitry as the more expensive RME studio models. Latency is extremely low thanks to the TotalMix FX drivers. Two balanced main outputs allow KRK speakers to be connected directly to the interface.
The KRK Rokit RP8 G5 speakers feature an 8" woofer and a textile dome tweeter. Each speaker has its own on-board DSP for adjusting response curves. An LCD screen at the rear lets you view the settings without the need for external software.
All the necessary cables are included in the pack. Installation takes less than 10 minutes, even if you have no DAW experience.
The 24-bit/192kHz AD/DA conversion is based on the same circuitry as the more expensive RME studio models. Latency is extremely low thanks to the TotalMix FX drivers. Two balanced main outputs allow KRK speakers to be connected directly to the interface.
The KRK Rokit RP8 G5 speakers feature an 8" woofer and a textile dome tweeter. Each speaker has its own on-board DSP for adjusting response curves. An LCD screen at the rear lets you view the settings without the need for external software.
All the necessary cables are included in the pack. Installation takes less than 10 minutes, even if you have no DAW experience.
Other features
-
Audio Interface + Speakers Pack, including :
-
RME Babyface Pro FS
-
USB 2.0 audio interface
-
Mac and PC compatible
-
12 input channels and 12 output channels
-
4 x analogue inputs (mic, line, instrument)
-
4 x analogue outputs (2 x XLR, 2 x headphones)
-
1 ADAT or optical SPDIF input/output
-
1 MIDI input/output
-
1 USB 2.0 port (USB 3 compatible)
-
Digital gain control on all inputs
-
High or low impedance headphone outputs (6.35 mm jack and mini-jack)
-
Ideal for : Recording studio, Live performance / DJ, Producers, Room calibration, Mobile solution
-
Technical specifications :
-
AD, Microphone/Line 1-2
-
Input: XLR, electronically balanced
-
Frequency response :
-
44.1 kHz, -0.1 dB: 18 Hz - 20.8 kHz
-
96 kHz, -0.5 dB: 7 Hz - 45.8 kHz
-
192 kHz, -1 dB : 5 Hz - 88 kHz
-
Maximum input level XLR :
-
Gain 0 dB : +8 dBu, PAD+19 dBu
-
Gain 65 dB : -57 dBu, PAD-46 dBu
-
Input: 6.3 mm TS jack, unbalanced
-
Frequency response :
-
44.1 kHz, -0.1 dB : 5 Hz - 20.8 kHz
-
96 kHz, -0.5 dB :
-
192 kHz, -1 dB :
-
Maximum input level
-
+4 dBu, Gain 0 dB : +13 dBu
-
10 dBV, Gain 9 dB : -5 dBu
-
DA, Line Out 1-2
-
Frequency response :
-
44.1 kHz, -0.5 dB : 0 Hz - 20.8 kHz
-
96 kHz, -0.5 dB : 0 Hz - 45 kHz
-
192 kHz, -1 dB : 0 Hz - 89 kHz
-
Output: XLR balanced
-
Output impedance: 300 Ohm balanced, 150 Ohm unbalanced
-
Output level at 0 dBFS: balanced +19 / +4 dBu, unbalanced +13 / +7 dBu
-
DC @ 0 dBFS : 6.35 mm 4.8 V, 3.5 mm 2.4 V, XLR bal. 9.6 V
-
DA, 3/4" PHONES
-
AS DA Line Out :
-
Output: 6.3 mm TRS jack, unbalanced
-
Output impedance: 10 Ohm
-
Output level at 0 dBFS, 1 kOhm load: +13 dBu
-
Maximum power @ 0.1 THD: 60 mW
-
Signal-to-noise ratio (SNR): 114.8 dB RMS unweighted, 118 dBA
-
Noise level: -101.8 dBu
-
Output: 3.5 mm TRS jack, unbalanced
-
Output impedance: 0.1 Ohm
-
Output level at 0 dBFS, 1 kOhm load: +7 dBu
-
Maximum power @ 0.1 THD: 90 mW
-
Signal-to-noise ratio (SNR) : 114 dB RMS unweighted, 117 dBA
-
Noise level: -107 dBu
-
MIDI :
-
1 x MIDI I/O via connection cable with 2 x 5-pin DIN connectors
-
High-speed mode: Icing and response times typically less than 1 ms
-
DIGITAL :
-
Clocks: Internal, ADAT In, SPDIF In
-
External clock jitter suppression: > 50 dB (2.4 kHz)
-
Sampling frequencies supported: 28 kHz to 200 kHz
-
Digital input
-
ADAT Optical
-
1 x TOSLINK
-
Standard: 8 channels, 24 bit, up to 48 kHz
-
Double speed (S/MUX): 4 channels 24-bit 96 kHz
-
Quad speed (S/MUX4): 2 channels 24-bit 192 kHz
-
Locking range: 31.5 kHz - 50 kHz
-
Jitter suppression: > 50 dB (2.4 kHz)
-
SPDIF optical
-
1 x optical, to IEC 60958
-
Accepts : Consumer and professional format
-
Locking range: 27 kHz - 200 kHz
-
Jitter suppression: > 50 dB (2.4 kHz)
-
Digital outputs
-
Optical ADAT
-
1 x TOSLINK
-
Standard: 8 channels 24 bit, up to 48 kHz
-
Double speed (S/MUX): 4 channels 24-bit 96 kHz
-
Quadruple speed (S/MUX4): 2 channels 24-bit 192 kHz
-
SPDIF optical sampling frequency: 28 kHz to 200 kHz
-
General :
-
Power supply: USB bus or external power supply
-
Idle power consumption: 2.8 Watts
-
Typical power consumption: 3.7 Watts
-
Max power consumption: 5.4 Watts
-
Dimensions (WxHxD): 108 x 35 x 181 mm
-
Weight: 680 g
-
+
-
KRK Rokit RP8 G5 (pair)
-
Active studio monitor
-
Made in the USA
-
Configuration: 2-way Bass Reflex
-
Drivers: 8" (203 mm), woven Kevlar fibre aramid cone
-
Tweeter: 1" (25 mm), silk dome, copper cap, ferrite magnet
-
Crossover: 1.64 kHz
-
Frequency response: 32 Hz ⭢ 40 KHz
-
Bi-Amplification: Class D 203 watts
-
HF amplifier: 68 watts
-
LF amplifier: 135 watts
-
Total dynamic power: 312 watts
-
Maximum SPL: 111 dB
-
Dispersion: H148° x V125
-
Connectors: Combo XLR/TRS jack Ø6.35mm Balanced
-
Input impedance: 5.12 kΩ Balanced
-
Signal-to-noise ratio: 94 dB (Low Sensitivity setting, balanced), 91 dB (High Sensitivity, unbalanced)
-
Material: vinyl-wrapped MDF
-
Built-in DSP-controlled LCD visual equalizer
-
25 graphic equalisations for different environments
-
Controls:
-
Volume
-
EQ Parameters: LF and HF adjust
-
LCD Display: Brightness, Contrast, Standby, Logo, Factory Reset
-
KRK app with room-correction module
-
Dimensions: 400 x 319 x 266 mm
-
Weight : 10,45 Kg
To find out more...
The original RME Babyface audio interface was a huge success when it was released. That's why RME knew that in order to raise the bar, it needed a complete overhaul. Babyface Pro 12 inputs and 12 outputs is the result of their work. The Pro is designed to give you the quality of the original, but with great control right on its front plate, a robust and attractive aluminium housing, and virtually no need for breakout cables. The RME Babyface Pro makes it easier than ever to create the tracks you need.
Videos
You may also like
Spotlight on
Since 1996, RME has been providing high-quality equipment for computer-based music recording (CBR): Converters, USB, FireWire and/or Thunderbolt audio interfaces with built-in DSP, which together with TotalMix FX offer numerous mixing, effects and even remote control features. The majority of RME's products are Mac, PC and iOS compatible, giving you the freedom to record and produce, wherever the music takes you. Whether it's for the stage or studio, you can count on your RME audio equipment to deliver the quality and reliability you expect.
