Audio Interfaces

audio interface to the USB 2.0 format rack Tascam US-1200 features six inputs and two outputs can be used simultaneously

ARTICLE N° 43661
  • USB audio interface with 6 inputs and 2 outputs
  • All inputs and all outputs can be used simultaneously.
  • Four mic / line inputs with balanced XLR switchable phantom power (48 volts), controls and level indicators on front panel
  • Microphone Preamplifier HDDA Tascam (HHDA means High Definition Discrete architecture, a differential preamp circuit based on selected transistors and other electronic components carefully selected to provide a signal / noise ratio, low noise input and reported low distortion)
  • Switchable phantom power (48 V) for condenser microphones
  • Two guitar / line inputs with level controls and indicators on the front panel (jacks 6.35 mm 3 points [TRS], symmetrical when switching on a line-level)
  • Two line outputs symmetrical rear (6.35 mm jacks 3 points [TRS])
  • Output stereo headset with level control (2 x 50 mW)
  • Sampling frequency up to 96 kHz with a resolution of 24 bits
  • Built-in digital mixer whose mode can be selected between "Multi-track" (multi) and "Stereo Mix" (stereo mix)
  • Mode for multitrack recording and composition DAW: create an independent monitor mix control the actual recording levels
  • Stereo mix mode for internet distribution and video editing: create a stereo mix of six different sources in addition to the signal returning from the computer
  • Intuitive mixing and management effects with the mixer panel on computer screen
  • Built-in effects (44.1 / 48 kHz only): The effects insert (compressor, noise suppressor, de-esser, exciting, 3-band EQ) can be used on the input channels The reverb effect can be used on an effects loop with the departures of all channels, master blender or
  • Low Latency Monitoring Listening
  • Monitor Mix Control Control to adjust the volume balance between external devices and those signals from the computer
  • Supports ASIO, WDM and Core Audio
  • USB 2.0
  • Compatible with Windows XP, Windows 7, Windows 8 and Mac OS X
  • AC adapter included
  • X3 SONAR LE (Windows only) and Ableton Live Lite (Mac / PC) provided
  • Rack Mounting 1U Chassis
All inputs are located on the front panel, to easily connect any type of audio source: 4 mic / line inputs on XLR with phantom power and two instrument / line inputs on TRS. The stereo output jack on the rear panel are symmetrical. The interface US-1200 integrates a DSP mixer, effects such as compressor, noise suppressor, de-esser, exciting, 3-band EQ and reverb. The US-1200 transmits your sounds with a sampling frequency up to 96 kHz and a numerical value to 24-bit resolution via a broadband connection USB 2.0 to a computer running Mac OS or Windows.

Spotlight on