FILTER
FILTER
Novastar - MX6000 Pro
New
8 757,50 €
excl VAT
Out of stock
Guarantee 3
years
REFERENCE : NOVMX6000PRO
Jessie
Louis
Do you need help?
The MX6000 Pro, from Novastar, is the control centre of a large-scale LED system; it receives the various video sources, organises their display and distributes the signals to the screens. Its modular design allows the inputs and outputs to be configured according to the type of production, whether it be an xR/VP set, a large-scale event, a TV control room or a fixed installation.
ARTICLE N° 127068
Novastar - MX6000 Pro
Novastar - MX6000 Pro
New
8 757,50 €
excl VAT
Out of stock
Guarantee 3
years
REFERENCE : NOVMX6000PRO
Jessie
Louis
Do you need help?
Presentation
The NovaStar MX6000 Pro is an 8K LED controller designed for set-ups where the number of light sources, the size of the screens and the variety of formats require a particularly scalable architecture. Integrated into the COEX system, it employs a fully modular design: eight slots are available for input cards and a further eight for output cards, allowing a configuration to be built to suit each installation rather than relying on a fixed set of connections.
This design opens the door to a wide range of video architectures. In particular, the MX6000 Pro can accommodate HDMI 2.0 or 2.1, DisplayPort 1.2 or 1.4, and 12G-SDI cards, as well as cards dedicated to SMPTE ST 2110 IP transport at 25G or 100G. A specific DP 1.4 card even allows an 8K source to be utilised at 60 Hz. On the output side, various cards allow operation at 1G or 5G, with 10G or 40G optical links and, depending on the configuration, direct 5G Ethernet outputs.
Video processing is another key feature of the MX6000 Pro. Up to 32 4K layers can be used, with independent pan and scale, whilst colour management tools include colour replacement, 14-channel correction, curves and 3D LUTs. HDR10, HLG, 12-bit processing, Dynamic Booster and multi-layer calibration allow the on-screen output to be fine-tuned, even in camera capture set-ups.
Synchronisation and operational continuity have also been designed with mission-critical systems in mind. Genlock, fail-safe architectures and automatic failover between certain components help to minimise interruptions in the event of a failure. The MX6000 Pro also features a dual power supply to keep the system operational should one power supply fail.
Control can be carried out directly via the 7-inch IPS touchscreen and front-panel controls, or via VMP over Ethernet. SNMP, Art-Net and centralised control round off the integration options. With a maximum advertised capacity of 141 million pixels, the MX6000 Pro is particularly well-suited to large LED walls, xR/VP productions, television studios, sporting events and very large-scale fixed installations.
This design opens the door to a wide range of video architectures. In particular, the MX6000 Pro can accommodate HDMI 2.0 or 2.1, DisplayPort 1.2 or 1.4, and 12G-SDI cards, as well as cards dedicated to SMPTE ST 2110 IP transport at 25G or 100G. A specific DP 1.4 card even allows an 8K source to be utilised at 60 Hz. On the output side, various cards allow operation at 1G or 5G, with 10G or 40G optical links and, depending on the configuration, direct 5G Ethernet outputs.
Video processing is another key feature of the MX6000 Pro. Up to 32 4K layers can be used, with independent pan and scale, whilst colour management tools include colour replacement, 14-channel correction, curves and 3D LUTs. HDR10, HLG, 12-bit processing, Dynamic Booster and multi-layer calibration allow the on-screen output to be fine-tuned, even in camera capture set-ups.
Synchronisation and operational continuity have also been designed with mission-critical systems in mind. Genlock, fail-safe architectures and automatic failover between certain components help to minimise interruptions in the event of a failure. The MX6000 Pro also features a dual power supply to keep the system operational should one power supply fail.
Control can be carried out directly via the 7-inch IPS touchscreen and front-panel controls, or via VMP over Ethernet. SNMP, Art-Net and centralised control round off the integration options. With a maximum advertised capacity of 141 million pixels, the MX6000 Pro is particularly well-suited to large LED walls, xR/VP productions, television studios, sporting events and very large-scale fixed installations.
Features
USB port
Yes
Weight
21,5 kg
Power supply
220 V
Accessories included
Câble ethernet
Packaging
Single unit
Other features
-
NovaStar MX6000 Pro
-
Modular 8K LED display controller from the COEX series
-
Architecture: up to 8 input cards and 8 output cards
-
Maximum capacity: 141 million pixels
-
Maximum display width: 16,384 pixels
-
Maximum display height: 16,384 pixels
-
Layers: up to 32 4K layers
-
Inputs: HDMI 2.0, HDMI 2.1, DP 1.2, DP 1.4, 12G-SDI and SMPTE ST 2110 cards
-
Video depth: 8-bit, 10-bit and 12-bit
-
Refresh rate: up to 480 Hz depending on configuration
-
Minimum latency: 0 frames, less than 1 ms
-
Scaling: real-time and layer-independent
-
Scaling modes: custom, pixel-to-pixel and other modes depending on configuration
-
HDR: HDR10 and HLG
-
Wide colour gamut: support for advanced colour processing
-
3D: support for 3D display
-
Colour Replacement: selective colour replacement
-
Colour correction: 14 channels
-
Colour Curves: RGBW curve adjustment
-
3D LUT: .cube files
-
3D LUT: resolution up to 65 × 65 × 65
-
Dynamic Booster: dynamic enhancement of contrast and detail
-
Full Grayscale Calibration: multi-layer calibration
-
Presets: up to 128 configurations
-
Non-rectangular screens: support without rectangular restrictions
-
Frame Rate Adaptive: automatic adaptation of frame rate according to the source
-
Adaptive frame rates: 23.98 to 240 Hz depending on configuration
-
Genlock: input and output loop
-
Genlock: Bi-Level, Tri-Level and Blackburst
-
Genlock range: 23.98 to 60 Hz
-
Software control: VMP
-
Network control: Gigabit Ethernet
-
Protocols: TCP/IP, SNMP, Art-Net and centralised control
-
Ethernet daisy-chain: up to 20 MX6000 Pro units
-
Serial control: AUX RS232
-
Audio output: 1 × S/PDIF
-
Control screen: 7-inch IPS touchscreen
-
Local controls: touchscreen, scroll wheel and BACK button
-
USB: USB 2.0 for diagnostic export
-
Cascading: up to 20 units
-
Synchronisation: Genlock, active source or internal clock depending on configuration
-
System configurations: 1G or 5G architecture depending on the output and receive cards used
-
Fail-safe operation: redundancy and automatic failover depending on configuration
-
Power supply: dual AC power supply
-
Mains input: 100–127 V AC / 200–240 V AC, 50/60 Hz
-
Maximum current: 15 A at 100–127 V / 10 A at 200–240 V
-
Maximum power consumption: 820 W for a fully configured system
-
Protection rating: IP20
-
19" rack: 6U
-
Dimensions: 482.6 × 282.9 × 538.8 mm
-
Chassis weight: 21.5 kg, excluding input and output cards
-
Accessories included: 2 × power cables, Ethernet cable, HDMI 2.1 cable, DP 1.4 cable, quick start guide, safety documentation and certificate
-
Control board: included
-
Input cards: sold separately
-
Output cards: sold separately
-
Compatible receiver cards: XA50 Pro, CA50E, A8s-N, A7s Plus, A5s Plus and B6s depending on configuration (see below)
-
PLEASE NOTE: Older MRV series receiver cards are not supported.
To find out more...
- Older MRV series receiver cards: not supported
- MX_4×HDMI 2.0 input card: 4 × HDMI 2.0, up to 4096 × 2160 at 60 Hz
- MX_2×HDMI 2.1 input card: 2 × HDMI 2.1, up to 8192 × 4320 at 30 Hz
- MX_4×DP 1.2 input card: 4 × DP 1.2, up to 4096 × 2160 at 60 Hz
- MX_2×DP 1.4 input card: 2 × DP 1.4, up to 7680 × 4320 at 30 Hz
- MX_1×DP 1.4 8K input card: 1 × DP 1.4, up to 7680 × 4320 at 60 Hz
- MX_4×12G-SDI input card: 4 × 12G-SDI, up to 4096 × 2160 at 60 Hz
- MX_1×DP 1.4 + 1×HDMI 2.1 input card: 1 × DP 1.4 + 1 × HDMI 2.1
- MX_1×ST 2110 25G input card: 1 primary stream + 1 backup stream, SMPTE ST 2110 and SMPTE 2059
- MX_2×ST 2110 25G input card: 2 primary streams + 2 backup streams
- MX_1×ST 2110 100G input card: up to 8192 × 4320 at 60 Hz on a single source
- ST 2110: support for SMPTE 2022-7 for redundancy
- ST 2110: NMOS IS-04, IS-05 and IS-09 management
- ST 2110: IEEE 1588-2008 PTP synchronisation
- MX_4×10G Fibre output card: 4 × 10G SFP+
- MX_4×10G Fibre: transmission up to 10 km in single-mode
- MX_4×10G Fibre: transmission up to 300 m in multi-mode
- MX_4×10G Fibre: up to 40 equivalent 1G Ethernet outputs
- MX_4×10G Fibre: maximum capacity of 17,694,720 pixels at 8/10-bit resolution at 60 Hz
- MX_4×10G Fibre: maximum capacity of 13,194,440 pixels at 12-bit resolution at 60 Hz
- MX_1×40G Fibre output card: 1 × QSFP+ 40G
- MX_1×40G Fibre: transmission rate of 41.25 Gbps
- MX_1×40G Fibre: up to 10 km over single-mode fibre
- MX_1×40G Fibre: up to 100 m over OM3 multimode fibre
- MX_1×40G Fibre: up to 150 m with OM4 multimode fibre
- MX_1×40G Fibre: capacity equivalent to 8 5G Ethernet ports
- MX_1×40G Fibre: maximum capacity of 17,694,720 pixels at 8/10-bit resolution at 60 Hz
- MX_1×40G Fibre: maximum capacity of 11,804,800 pixels at 12-bit resolution at 60 Hz
- MX_8×5G Base-T output card: 8 × 5 Gbps Ethernet outputs
- MX_8×5G Base-T: maximum capacity of 17,694,720 pixels at 8/10-bit resolution at 60 Hz
- MX_8×5G Base-T: maximum capacity of 11,804,800 pixels at 12-bit resolution at 60 Hz
- MVR card: 1 × HDMI 2.0 + 1 × 12G-SDI
- HDMI MVR card: up to 3,840 × 2,160 at 60 Hz, RGB 4:4:4, 8-bit
- 12G-SDI MVR card: up to 3840 × 2160 at 60 Hz, YCbCr 4:2:2, 10-bit
- Control card: 2 × Gigabit Ethernet
- Control card: 1 × Genlock IN + LOOP
- Control card: 1 × AUX RS232
- Control card: 1 × S/PDIF
- MX_4×HDMI 2.0 input card: 4 × HDMI 2.0, up to 4096 × 2160 at 60 Hz
- MX_2×HDMI 2.1 input card: 2 × HDMI 2.1, up to 8192 × 4320 at 30 Hz
- MX_4×DP 1.2 input card: 4 × DP 1.2, up to 4096 × 2160 at 60 Hz
- MX_2×DP 1.4 input card: 2 × DP 1.4, up to 7680 × 4320 at 30 Hz
- MX_1×DP 1.4 8K input card: 1 × DP 1.4, up to 7680 × 4320 at 60 Hz
- MX_4×12G-SDI input card: 4 × 12G-SDI, up to 4096 × 2160 at 60 Hz
- MX_1×DP 1.4 + 1×HDMI 2.1 input card: 1 × DP 1.4 + 1 × HDMI 2.1
- MX_1×ST 2110 25G input card: 1 primary stream + 1 backup stream, SMPTE ST 2110 and SMPTE 2059
- MX_2×ST 2110 25G input card: 2 primary streams + 2 backup streams
- MX_1×ST 2110 100G input card: up to 8192 × 4320 at 60 Hz on a single source
- ST 2110: support for SMPTE 2022-7 for redundancy
- ST 2110: NMOS IS-04, IS-05 and IS-09 management
- ST 2110: IEEE 1588-2008 PTP synchronisation
- MX_4×10G Fibre output card: 4 × 10G SFP+
- MX_4×10G Fibre: transmission up to 10 km in single-mode
- MX_4×10G Fibre: transmission up to 300 m in multi-mode
- MX_4×10G Fibre: up to 40 equivalent 1G Ethernet outputs
- MX_4×10G Fibre: maximum capacity of 17,694,720 pixels at 8/10-bit resolution at 60 Hz
- MX_4×10G Fibre: maximum capacity of 13,194,440 pixels at 12-bit resolution at 60 Hz
- MX_1×40G Fibre output card: 1 × QSFP+ 40G
- MX_1×40G Fibre: transmission rate of 41.25 Gbps
- MX_1×40G Fibre: up to 10 km over single-mode fibre
- MX_1×40G Fibre: up to 100 m over OM3 multimode fibre
- MX_1×40G Fibre: up to 150 m with OM4 multimode fibre
- MX_1×40G Fibre: capacity equivalent to 8 5G Ethernet ports
- MX_1×40G Fibre: maximum capacity of 17,694,720 pixels at 8/10-bit resolution at 60 Hz
- MX_1×40G Fibre: maximum capacity of 11,804,800 pixels at 12-bit resolution at 60 Hz
- MX_8×5G Base-T output card: 8 × 5 Gbps Ethernet outputs
- MX_8×5G Base-T: maximum capacity of 17,694,720 pixels at 8/10-bit resolution at 60 Hz
- MX_8×5G Base-T: maximum capacity of 11,804,800 pixels at 12-bit resolution at 60 Hz
- MVR card: 1 × HDMI 2.0 + 1 × 12G-SDI
- HDMI MVR card: up to 3,840 × 2,160 at 60 Hz, RGB 4:4:4, 8-bit
- 12G-SDI MVR card: up to 3840 × 2160 at 60 Hz, YCbCr 4:2:2, 10-bit
- Control card: 2 × Gigabit Ethernet
- Control card: 1 × Genlock IN + LOOP
- Control card: 1 × AUX RS232
- Control card: 1 × S/PDIF
